[ipcsr76]

Hello everybody,

Can you confirm this description of REgFIX for installing or update manuelly ISTA-D...

Thanks a lot


My supposition :

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\ISTA]

VERSION FOR ISTA APPS
"ProductVersion"="4.39.20.24455"

VERSION FOR ISTA APPS SHORT
"MainProductVersion"="4.39"

VERSION FOR GLOBAL DATA SQLITE
"DataVersion"="4.39.20"

VERSION DATA FOR BLP
"LogisticBaseVersion"="4.39.20"

VERSION DATA FOR SQLITE LAGUAGES
"DataVersion_de-DE"="4.39.20"
"DataVersion_en-GB"="4.39.20"

VERSION DATA FOR SDP
"SWIData"="4.41.30"
"SWIDataUX"= "4.43.40" (This is for Motorrad mode)

LOCATION FOR ISTA IS INSTALLED
"InstallLocation"="C:\\EC-APPS\\ISTA"

[ReW]

I also have a question, if the ISTA version 4.36.40 with BLP and SDP of the same version is installed, and I downloaded the full date 4.43.40, then I just need to replace the data in the data_swi folder and replace the line "SWIData"= "4.36.40" with "SWIData"= "4.43.40" in the registry. Will that be enough? Or you need to replace something else, there are a lot of questions and discussions, but I did not find a clear and clear answer. Someone writes you need to change LogisticBaseVersion"= "***"

[PUMUKY1]

I also have a question, if the ISTA version 4.36.40 with BLP and SDP of the same version is installed, and I downloaded the full date 4.43.40, then I just need to replace the data in the data_swi folder and replace the line "SWIData"= "4.36.40" with "SWIData"= "4.43.40" in the registry.  Will that be enough? Or you need to replace something else, there are a lot of questions and discussions, but I did not find a clear and clear answer. Someone writes you need to change LogisticBaseVersion"= "***"

LogisticBaseVersion"= "4.43.40"

[ReW]

I also have a question, if the ISTA version 4.36.40 with BLP and SDP of the same version is installed, and I downloaded the full date 4.43.40, then I just need to replace the data in the data_swi folder and replace the line "SWIData"= "4.36.40" with "SWIData"= "4.43.40" in the registry.  Will that be enough? Or you need to replace something else, there are a lot of questions and discussions, but I did not find a clear and clear answer. Someone writes you need to change LogisticBaseVersion"= "***"

LogisticBaseVersion"= "4.43.40"

Thanks a lot, I will replace all files in the data_sii folder with files from the full date 4.43.40 and make edits in the registry:

"LogisticBaseVersion"= "4.43.40"
"SWIData"= "4.43.40"
"SWIDataUX"= "4.43.40" (This is for displaying data if you switch to Motorrad mode)

[ipcsr76]

I also have a question, if the ISTA version 4.36.40 with BLP and SDP of the same version is installed, and I downloaded the full date 4.43.40, then I just need to replace the data in the data_swi folder and replace the line "SWIData"= "4.36.40" with "SWIData"= "4.43.40" in the registry.  Will that be enough? Or you need to replace something else, there are a lot of questions and discussions, but I did not find a clear and clear answer. Someone writes you need to change LogisticBaseVersion"= "***"

LogisticBaseVersion"= "4.43.40"

Hello,


The " LogisticBaseVersion" is for BLP DATA VERSION