Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bentley coding driver seat unit
15-10-2023, 10:01 AM,
Post: #1
|
|||
|
|||
Bentley coding driver seat unit
Bentley Continental GT 2020 I'm trying to code the driver's seat control unit, the Odis displays error ERP0237E. The unit is completely new, the firmware in the unit is only one version, so I can’t update it, the numbers of the old and new ones are completely the same, does anyone know why this error appears?
|
|||
15-10-2023, 18:04 PM,
Post: #2
|
|||
|
|||
RE: Bentley coding driver seat unit
VW technical tip:
Technical Background: Scan tool Error Message ERP0215E displays while performing Software Version Management (SVM) Control Module Software updates. The message displays when attempting to install software in the incorrect order. Production Solution Service: If you receive error message ERP0215E during SVM Control Module Software update, the error message can be the result of installing latest software without previous software updates having been completed. Check to see if there is more than 1 SVM software update for the control module.The oldest software update must be done first. If the latest software is installed first, and then the earlier software attempted after, ERP0215E will set. |
|||
15-10-2023, 22:59 PM,
(This post was last modified: 15-10-2023, 23:01 PM by Artem2287096.)
Post: #3
|
|||
|
|||
RE: Bentley coding driver seat unit
yes, I found this, but I have error erp0237e
There are no old firmwares for this block, only one, but it is already uploaded to the module, is there any coding solution? |
|||
31-10-2023, 16:59 PM,
Post: #4
|
|||
|
|||
RE: Bentley coding driver seat unit
I found in the eeprom of the old block the name of the software that should be loaded, I flashed it into the block, but I can’t do the parameterization online, the server just says it’s impossible to execute ((can someone share the v03935351FG parameters? Is it possible to make a parameter file based on the eeprom of the seat block?
|