Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mini R56 KL15: 0
11-11-2023, 18:40 PM,
Post: #1
|
|||
|
|||
Mini R56 KL15: 0
Hello
A friend parked the car and the next day the car has no contact. I have diagnosed it with ISTA and voltage control to be able to connect to the car. The error codes are: 00A3B2 Error message (terminal status, 0x130), KOMBI receiver, CAS transmitter 00A3BB Error message (door status, 0x2FC), KOMBI receiver, CAS transmitter 00C914 Message missing, JBE receiver, SZL transmitter 00C91E Message missing (terminal status, 0x130), JBE receiver, CAS transmitter I have looked at JBE if it has water symptoms and all the fuses, everything is fine. I have cloned the CAS with a scrap one, everything remains the same. Could it be that JBE is damaged? |
|||
11-11-2023, 21:34 PM,
Post: #2
|
|||
|
|||
RE: Mini R56 KL15: 0
Could be that the JBE is damaged, but that's just a gamble.
I think it's time to investigate why the car has no contact. What are the inputs to the CAS? Are any of the terminals 15, 15WUP or R high while the key is off? Does the CAS recognize the key? Have you tested the key, or a different key in the car? |
|||
Reputation: +1 - PUMUKY1 [+1] | |||
12-11-2023, 18:01 PM,
Post: #3
|
|||
|
|||
RE: Mini R56 KL15: 0
(11-11-2023, 21:34 PM)user0086 Wrote: Could be that the JBE is damaged, but that's just a gamble. CAS does recognize the key, it has been tested with 2 keys In the diagnosis all modules are green (no faults) except JBE and COMBI I will try terminals 15, 15WUP and R |
|||
13-11-2023, 07:02 AM,
Post: #4
|
|||
|
|||
RE: Mini R56 KL15: 0
If all modules are green, what exactly do you mean by "has no contact"?
I assumed you ment it didn't respond to the key. |
|||
13-11-2023, 07:51 AM,
Post: #5
|
|||
|
|||
RE: Mini R56 KL15: 0
Check obd pin1 - cas pin 13 when ignition on
If cas is not sending kl15 to obd port, icom can not see kl15 Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself Tuning - DPF Off - EGR Off - or any etc Certificated WinOLS Trainer |
|||
13-11-2023, 18:35 PM,
Post: #6
|
|||
|
|||
RE: Mini R56 KL15: 0
(13-11-2023, 07:02 AM)user0086 Wrote: If all modules are green, what exactly do you mean by "has no contact"? 1 the CAS does recognize the key 2 the car has no contact, KL15=0V, OBD pin1=0V 3 I can do diagnosis because I use APP voltage control (see image) 4 CAS and SZL modules in green, without faults (see image) 5 MRS module in red because it is disconnected, otherwise also green 6 JBE and COMBI modules with errors, error code in post 1 |
|||
14-11-2023, 07:02 AM,
Post: #7
|
|||
|
|||
RE: Mini R56 KL15: 0
So it does have 15WUP, otherwise many modules would be red.
Internally, 15_OBD (pin 13) is connected to some other KL15 outputs (7, 8, 14). I would first check if you have power on pin 34 from fuse f36 with a testlight. If that is ok, i would check if any of the terminal 15 outputs is shorted to GND by using a testlight to battery + (or by removing them from the CAS connector and check using ISTA if 15 voltage becomes high) In the end, if nothing is connected to the KL15 outputs, the CAS should be able to make them high since 15WUP seems to be working. |
|||
Reputation: +1 - PUMUKY1 [+1] | |||
16-11-2023, 07:18 AM,
Post: #8
|
|||
|
|||
RE: Mini R56 KL15: 0
Are you sure the keys are ok? I had a car die like this. No ignition but key was being sucked in at the slot. Got a cas and key from e90 and tested. Ignition back on.
|
|||
Reputation: +1 - PUMUKY1 [+1] | |||
16-11-2023, 11:29 AM,
Post: #9
|
|||
|
|||
RE: Mini R56 KL15: 0
|
|||
16-11-2023, 18:58 PM,
Post: #10
|
|||
|
|||
RE: Mini R56 KL15: 0
Check the cable from cas to the key slot
|
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
Please, can somebody help me to ZCS CODE from a MINI R50? | hipolitogt | 2 | 59 |
30-05-2024, 10:30 AM Last Post: hipolitogt |
|
VO MINI F56 | Bimmer540 | 5 | 879 |
27-05-2024, 22:09 PM Last Post: dekota28 |
|
Mini Connected - NBT EVO | Billyjoe69 | 1 | 104 |
25-05-2024, 14:47 PM Last Post: dumitru.o |
|
BMW/Mini strange EPS part number | Alyn546 | 4 | 120 |
23-05-2024, 07:54 AM Last Post: Alyn546 |
|
Mini F55 EPS 4822F7 error | Alyn546 | 19 | 355 |
22-05-2024, 22:09 PM Last Post: Node |
|
VO required for Mini Cooper S 2004 | DirkP35 | 0 | 51 |
13-05-2024, 20:28 PM Last Post: DirkP35 |
|
FRM3 MINI eee solution | ArcziArcz | 4 | 251 |
11-05-2024, 07:58 AM Last Post: Dash_Burner |
|
mini f60 countryman, mileage issues red dot after cluster replacement | deutsch | 6 | 237 |
08-05-2024, 11:15 AM Last Post: EngineerX |
|
Mini Tooth to mechanical code | koziol | 0 | 117 |
14-04-2024, 14:27 PM Last Post: koziol |
|
MINI R60 .SSD-File COAPI-1000 | bmw335coding | 0 | 83 |
11-04-2024, 14:56 PM Last Post: bmw335coding |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content