[justdiag]

Offboard Diagnostic Information System Service 23.1.x

Password for the files if needed is justdiag

BEWARE:

0. Because of the new protection system used by VAG from this version, the automatic ID of a car by VIN it is not working anymore offline. You will have to select it manually. On auto ID you will receive an error without VAG authentification.
1. The program works only with 64 bits systems from Windows 10 UP.
2. The interfaces supported are GENUINE VAS 615X and Passthru (beware on PT limitations like missing ignition detection)

Note: Some users reported that red VNCI clone works on this version as an emulated 6154 VAS.

Activations will be done ONLY for users with minimum 150 POSTS and 10 REP (max 2 keys/user).

As an additional rule for those that received keys until now on previous version (23.0.1), at least 1 feedback .

*Even if you have the min posts and rep and you did not have the decency to provide at least one feedback before, a key here will not be provided.
Do not insist.

*For those users that did provide feedback in previous version (23.0.1) i want to thank you all, and for you, the rule posts and rep DOES NOT APPLY. You will always have my respect and will receive a key on this new one.


***NOTE***
Before you request a key please disconnect any usb drives from your system , Launcher or GETID must be run As Administrator, autotranslate must be OFF and VM's are not supported.

Please make sure you select a license.dat(from License&GetID.7z) on install of the program, if you don't then after it's registration you will get an error.

As you can see registrations are free as long as you contribute to the life of the forum (min. posts and rep to reflect your activity).
If you can't do that or you do not have the time to do that.... or any other reason, please stop posting requests and be annoying since you can always use older versions of the program or you can buy activation keys in Marketplace Area -

HERE

[justdiag]

Users that did provide feedback on 23.0.1 :
isdochegal ; edtech ; kiranabc ; Tizen99 ; jokir ; codingbmwsofia ; pupu144 ; ahmedmph ; liviu2004 ; htservice; Jacce75; MahoJohn; belkor; autoraedarum; Loliceman.

No feedback:
PopDog; Wildey1771; vagtizi; gcesare21; alexturbo; jhon006; bobdinro; mouss35500; atomantmk; szilagyilajos; Diagmaister; getaibose; crypt0ninja; smlee747; jinyouZ; Isooow; alpntrb; billyleon; eyldar; VasyaUA; Navigationmaster; roanoke; Tekero; heshamzn; tu329; Chriz; rocdeng; eyldar; murto; dejwa; sokisoki3; pablo202 .

If i missed anyone or put him/her in the wrong list, my apologies, please do PM me and i will correct the list.

[liviu2004]

Thanks for this, would I have to uninstall 23.0.1 first then install 23.1.3? Or just directly install new version?

[isdochegal]

Hi and Thank you! But there is again a strange thing with the GetID on my diagnostic laptop. When I start it as admin, I see a different ID than when I start it normally. The HDD serial number appears to be changing. No USB device or similar is connected.

0ED894-E7BD81-0440AA-BC244C - normal start

010594-E7BD81-04404A-A3244C - start as admin

Addendum: It gets even weirder: the same ID is always displayed on my other laptop and a desktop pc, on normal start or as as admin. The problem only seems to occur with my diagnostic laptop. Maybe it is because a view weeks ago i have deleted 2 partitions and rezised the last partition on this SSD.

[rocdeng]

Sorry, I just received the clone 6154a and it did not work properly,I had to return it to the seller so I couldn't give real feedback(the key and program work properly but I couldn't test it with the car so I didn't feedback). After I get the device back I'll give feedback.
My clone device feedback post is here:
VNCI 6154A Clone experience (cartechnology.co.uk)

[justdiag]

....

0ED894-E7BD81-0440AA-BC244C - normal start

010594-E7BD81-04404A-A3244C - start as admin

.....

In your case admin vs non admin run it changes because hdd id part. It seems that with admin primary is one and without another.... that u must know. 
This is why my advice is to always run the programs as administrator and even the install kits to make sure that all registry changes take place and all files are copied proper even by installers.

[edtech]

Hi mate, can I have activation for this HWID:

C78F94-E70D2B-2C3E9B-822C34


Thanks.

[isdochegal]

Okay, I see. So I would like the key for this ID: 010594-E7BD81-04404A-A3244C

[justdiag]

Name: cartechnology.co.uk

@edtech
ASvf-XYU2-OD4+-kaEt-sWkJ-MliY-slIV-Ttzo-J0Qm-iEqx-1mmR-CS1Y-+=oB-eNRJ-=VmI-vQub-d86j-91c5-qG3K-y3r2-LxWT-F7rb-oEK9-vzZn-xhc=-YMOz-y7a7-fuIE-JiuM-JbFH25

@isdochegal
ASvf-XYU2-OD4+-kaEj-uxG4-hUVo-A+j2-e=Hg-G0D2-5A=k-F=RF-s=iP-hDBl-fjS1-lIeJ-AKrT-PrA0-Y9Jq-Dern-KyfH-2cDz-nj9s-o47K-1aU6-kN9w-y0v2-JM=y-IJai-KD41-zmJ8F=

---

Thanks for this, would I have to uninstall 23.0.1 first then install 23.1.3? Or just directly install new version?

inside site.xml of this version's postsetup it's written: 
<category-def label="110000.301.0" name="needsMinVersion" />
<category-def label="../installation/OffboardDiagSetup-Service_VWMCD_11_0_0-0301_2.exe" name="installPath" />

So from any version begining with 11 up you can make upgrade to the latest and of course after this postsetup you will get an error becaue you will need to replace patched files with the new ones.

[htservice]

1BE994-E71D9A-C38981-FF7578
Hello ! Please activate ! Thanks