Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

ICAM2 on F23
27-11-2023, 11:53 AM,
Post: #1
XZBMW  ICAM2 on F23
Hi to all,
On F23 LCI from 2018, 3AG / ICAM2 was installed. Everything works perfect except an error message sometimes appearing randomly on the instrument.
The holder + camera were replaced without succes. On ISTA, when the error appear, it asks to check the camera holder.
Any idea ?
Thank you
Quote this message in a reply
27-11-2023, 11:59 AM,
Post: #2
RE: ICAM2 on F23
exactly what error appears?
Quote this message in a reply
27-11-2023, 12:56 PM,
Post: #3
RE: ICAM2 on F23
Error: "rear view camera malfunction"
just to insist that the camera works perfectly.
Quote this message in a reply
27-11-2023, 16:03 PM,
Post: #4
RE: ICAM2 on F23
(27-11-2023, 12:56 PM)smilo Wrote:  Error: "rear view camera malfunction"
just to insist that the camera works perfectly.

Was the replacement camera brand new?

Did you inject a cafd to the camera?

Did you “calibrate” in ISTA?

Kafas2 FSC part numbers smile
Quote this message in a reply
27-11-2023, 16:40 PM,
Post: #5
XZBMW  RE: ICAM2 on F23
(27-11-2023, 16:03 PM)Pommie Wrote:  
(27-11-2023, 12:56 PM)smilo Wrote:  Error: "rear view camera malfunction"
just to insist that the camera works perfectly.

Was the replacement camera brand new?

Did you inject a cafd to the camera?

Did you “calibrate” in ISTA?

Yes, the camera was updated to the last iLevel (with ENav2 and FEM). Of corse, all car ecu coded with the right FA.
The ICAM ECU is not brand new. However, it works correctly itself, and it was replaced.
The camera calibration ABL was applied successfully.

Thanks
Quote this message in a reply
27-11-2023, 17:01 PM,
Post: #6
RE: ICAM2 on F23
When ICAM is not 100% correctly fitted it throws this error, make sure its fitted tight then code and calibrate.

All my knowledge is free for exchange with valuable information
Sharing->Development
  • FSC Repair kits - FSC Retrofits and Conversions Service history
  • Secure Coding 2.0 Type Key, FA, SFA
  • NBT/EVO/EntryNav2/MGU
  • MGU Carplay/Android auto W/O Telematics/CP/Patching in Middle East and Northern Africa
  • Feature Installer codes B2B
  • DME VIN ISN Working Hours IMMO OFF File and Remote Service/SWIFTEC - MG1 MD1 IMMO OFF
  • (E,F,G) 7DCT - DKG - 8HP - 6HP - EGS7 ISN Reset
  • KAFAS4 Virgin and Patching Remote
  • CAS2/3/4 Full IMMO & LOCKSMITH Customization Dump & Remote
  • HUF5663_434Mhz NO REMOTE SIGNAL FIX
  • F&G Series Headlight Customization
Visit this user's website
Quote this message in a reply
27-11-2023, 17:09 PM,
Post: #7
RE: ICAM2 on F23
(27-11-2023, 17:01 PM)Mwahab Wrote:  When ICAM is not 100% correctly fitted it throws this error, make sure its fitted tight then code and calibrate.

Thanks Mwahab, 
Here you mean mechanically the camera is not 100% correctly fitted ? I must replace the boot lid/tailgate push-button ?
Quote this message in a reply
27-11-2023, 17:51 PM,
Post: #8
RE: ICAM2 on F23
I mean physically its not fitted tight, check the lock behind camera, check the plug etc

All my knowledge is free for exchange with valuable information
Sharing->Development
  • FSC Repair kits - FSC Retrofits and Conversions Service history
  • Secure Coding 2.0 Type Key, FA, SFA
  • NBT/EVO/EntryNav2/MGU
  • MGU Carplay/Android auto W/O Telematics/CP/Patching in Middle East and Northern Africa
  • Feature Installer codes B2B
  • DME VIN ISN Working Hours IMMO OFF File and Remote Service/SWIFTEC - MG1 MD1 IMMO OFF
  • (E,F,G) 7DCT - DKG - 8HP - 6HP - EGS7 ISN Reset
  • KAFAS4 Virgin and Patching Remote
  • CAS2/3/4 Full IMMO & LOCKSMITH Customization Dump & Remote
  • HUF5663_434Mhz NO REMOTE SIGNAL FIX
  • F&G Series Headlight Customization
Visit this user's website
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Help icam2 on f44 giando11 12 418 28-12-2023, 17:03 PM
Last Post: giando11
  MINI F56 ICAM2 retrofit without PMA possible? Cart75 0 278 02-02-2022, 20:11 PM
Last Post: Cart75
  F30 LCI 05.18 Retrofit ICAM2 alpinab4 0 624 24-06-2018, 15:46 PM
Last Post: alpinab4

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content