[Artem2287096]

Greetings to all! Can anyone help me virgin P-flash, dflash, eeprom of the kvm module? Module number Fk72-19h440-da

[huzefa]

Greetings to all! Can anyone help me virgin P-flash, dflash, eeprom of the kvm module? Module number Fk72-19h440-da

try

[Artem2287096]

Thank you !!! I'll try this file

[Artem2287096]

When programming kvm sdd, it displays error code A1D - incorrect conditions. Tell me, please, what can it be?

[huzefa]

When programming kvm sdd, it displays error code A1D - incorrect conditions.  Tell me, please, what can it be?

IS YOUR BCM ALARM ?

[Artem2287096]

I don’t understand) I’ll tell you how it all happened. Range Rover Evoque 2012, after replacing the battery, it stopped responding to the key. In the data on the blocks, I saw that the kvm VIN number is 000000000000, I decided to reset and flash the kvm, but when I run the firmware via sdd jlr it writes the error A1D-invalid conditions. Using vvdi prog I flashed p flash, dflash, eeprom, but the error is the same. The kvm control unit has a connection to the jlr sdd.

[ahmadarifai]

Were you able to fix this issue?

[huzefa]

I don’t understand) I’ll tell you how it all happened.  Range Rover Evoque 2012, after replacing the battery, it stopped responding to the key.  In the data on the blocks, I saw that the kvm VIN number is 000000000000, I decided to reset and flash the kvm, but when I run the firmware via sdd jlr it writes the error A1D-invalid conditions.  Using vvdi prog I flashed p flash, dflash, eeprom, but the error is the same.  The kvm control unit has a connection to the jlr sdd.

try to flash it with the old file

[Artem2287096]

Yes! Problem solved. I needed a normal virgin file, and a correct vvdi prog file entry