[Miyagi]

Hello,

I received a juke F15 2011 in AKL situation.

Was to nissan shop trying to code original new key first but no way.

Car came to me and i read bcm dump. Pin code on the first line was gone.

Can you tell me if the code on dump is the glovebox 12 digit label or the calculated one ?

Thank you

In attachment ori corrupted dump

Thanks

[raffy haddad]

No pin code in dump not exist but dump have 2 keys id46 7936
make transponder by key maker
regards

[Miyagi]

No pin code in dump not exist but dump have 2 keys id46 7936
make transponder by key maker
regards

Thank you for your answer. 

Yes in fact pin was gone. I have to write back pin code manually in dump to program key in dump or not ?

Can you tell me for my knowledge if pin code in dump is the calculated or the 12 digit glovebox code ?

I tried many time to code PCF7936 but at the end i got a failure... Tried with DP300 and abrites but no way do program it 

Got dtc code about bad key and mismatch engine bcm id..

Thank you

[raffy haddad]

My tool not showed that pin code in dump
if tjere is glovebox stickers calculate the pin code from there , and the pin not exist In  dump if you mean glove box pincode 
by dump no need to code anything jist put pcf 7936 and tool will create mew file write back to bcm and start car

Setimes old shcool key by dump saves time

I checked your file with vvdi it gives no key used and pin 643f wich is wrong

Post bcm stickers

[Miyagi]

Hello

Please here the bcm pic

[Miyagi]

My tool not showed that pin code in dump
if tjere is glovebox stickers calculate the pin code from there , and the pin not exist In  dump if you mean glove box pincode 
by dump no need to code anything jist put pcf 7936 and tool will create mew file write back to bcm and start car

Setimes old shcool key by dump saves time

I checked your file with vvdi it gives no key used and pin 643f wich is wrong

Post bcm stickers

Following your experience, can i use Xhorse Super or mandatory original PCF7936 ID46 on this car ?

[raffy haddad]

Not sure sometimes xhorse work and sometimes not work but you can test  no harm will be and inform us back

You can use supership as emulated transponder on used place or precode it to pcf7936 and use new key position and that will create new file write back

[Miyagi]

Hello,

Still have issue with this car.

Got new used BCM. Can anyone helping me to explain step to produce and synch Uese BCM with ecu ?

Thank you

I can pay for working solution

Robin