Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

G30 Entrynav2 - rear camera retrofit problem
23-01-2024, 09:19 AM,
Post: #1
XZBMW  G30 Entrynav2 - rear camera retrofit problem
Hi! 
I'm having a problem with G30 with SA606 (entrynav2) rear view camera retrofit (3AG)
I had to add Ethernet Switch because all ethernet ports on BDC were occupied (TCB, KAFAS and HU-B)
Connected ENS module according to wiring diagrams, connected KAFAS and ICAM to it and everything is visible in diagnostics. Flashed HU-B, BDC, ENS and ICAM to the newest software available. Coded whole car with modified VO (+3AG). When I put car in reverse I can see new screen layout for camera, I can change brightness and contrast settings, swith on lines and others so I assume camera is communicating fine with rest of the car. 
THE PROBLEM is that I have no image from camera. Screen is totally black. I have tried 2 cameras. On different car the camera is working. 
I have error code in HU-B - B7F8F8 - Digital video input: no video signal available. Can't find problem using ISTA test plan. No codes in any other module. 

Is it possible that my Entrynav2 doesn't support video image from ICAM2? Esys doesn't want to change any hardware when calculating TAL. 

Entrynav2 HWEL is 36CB-002.001.004
ICAM2  2079-003.004.001
BDC 1DF9-001.001.005

EDIT: What is that "ICAM2-RFK programming in the DO" (see attachment) And is it possible to run without running whole programming plan? ISTA wants me to change idrive controller because it's different part number right now.


Attached Files Thumbnail(s)
   
Quote this message in a reply
23-01-2024, 12:34 PM,
Post: #2
RE: G30 Entrynav2 - rear camera retrofit problem
1) Code the entire car using the ESYS (with VCM & MSM update)
2) Remove all errors using the ISTA+.
3) Disconnect the ground terminal from the battery AGM.
Quote this message in a reply
23-01-2024, 19:04 PM,
Post: #3
RE: G30 Entrynav2 - rear camera retrofit problem
(23-01-2024, 12:34 PM)vipsha Wrote:  1) Code the entire car using the ESYS (with VCM & MSM update)
2) Remove all errors using the ISTA+.
3) Disconnect the ground terminal from the battery AGM.

Are you serious or just trying to score more posts for some reason?
Quote this message in a reply
23-01-2024, 19:09 PM,
Post: #4
RE: G30 Entrynav2 - rear camera retrofit problem
Sometimes this happen with me btw, i have to lock ethernet and send car to sleep, and vo all modules not just what i think is dependent.
and check hwel differences when u calc tal with 3AG to check if entrynav2 hwel is different

All my knowledge is free for exchange with valuable information
Sharing->Development
  • FSC Repair kits - FSC Retrofits and Conversions Service history
  • Secure Coding 2.0 Type Key, FA, SFA
  • NBT/EVO/EntryNav2/MGU
  • MGU Carplay/Android auto W/O Telematics/CP/Patching in Middle East and Northern Africa
  • Feature Installer codes B2B
  • DME VIN ISN Working Hours IMMO OFF File and Remote Service/SWIFTEC - MG1 MD1 IMMO OFF
  • (E,F,G) 7DCT - DKG - 8HP - 6HP - EGS7 ISN Reset
  • KAFAS4 Virgin and Patching Remote
  • CAS2/3/4 Full IMMO & LOCKSMITH Customization Dump & Remote
  • HUF5663_434Mhz NO REMOTE SIGNAL FIX
  • F&G Series Headlight Customization
Visit this user's website
Quote this message in a reply
23-01-2024, 19:38 PM,
Post: #5
RE: G30 Entrynav2 - rear camera retrofit problem
Are you checked ethernet BDC-Entry_Nav?
Quote this message in a reply
23-01-2024, 20:21 PM,
Post: #6
RE: G30 Entrynav2 - rear camera retrofit problem
(23-01-2024, 19:09 PM)Mwahab Wrote:  Sometimes this happen with me btw, i have to lock ethernet and send car to sleep, and vo all modules not just what i think is dependent.
and check hwel differences when u calc tal with 3AG to check if entrynav2 hwel is different
Car was sleeping whole night. As I said: whole car was coded with 3AG, and none of the modules have hwel mismatch after Tal calculation except controller which is irrevelant.
(23-01-2024, 19:38 PM)qbek90 Wrote:  Are you checked ethernet  BDC-Entry_Nav?
Yes. It’s fine. Even used it to flash head unit.

I have tried flashing using ISTA to perform this “ ICAM2-RFK programming in the DO” but this nothing changed.
Quote this message in a reply
24-01-2024, 07:47 AM,
Post: #7
RE: G30 Entrynav2 - rear camera retrofit problem
You're in the same boat with me, also did one, first time I didn't mounted ENT switch, I mounted it after seeing no video was showing on navi, car is updated/coded. Although in official bmw retrofit pdf it shows that Entrynav2 it supports 3AG, I haven't seen actually one with this navi + 3AG camera that works so unless you guys really came across, this makes me believe that it might not be suported and requires nbt evo head unit.

regards!
Quote this message in a reply
24-01-2024, 09:06 AM, (This post was last modified: 24-01-2024, 09:07 AM by larshutten.)
Post: #8
RE: G30 Entrynav2 - rear camera retrofit problem
I did one couple of weeks ago. After Ethernet switch and wiring according to correct diagram it worked without issues.

Do atm functions work? Just fast check if all eth wires are in the correct pins.
Quote this message in a reply
24-01-2024, 16:13 PM,
Post: #9
RE: G30 Entrynav2 - rear camera retrofit problem
Do you have the p/n for the ethernet switch?

MGU virgin and patching in Europa.
Secure coding 2.0
Feature installer codes
Quote this message in a reply
24-01-2024, 21:35 PM, (This post was last modified: 24-01-2024, 21:50 PM by markodsk.)
Post: #10
RE: G30 Entrynav2 - rear camera retrofit problem
Try adding 5DM instead of 3AG to FA and try to calculate TAL. You should see ICAM show up in the modules list and then you can VO code the car and necessary modules (HU_Entrynav2, ACSM5, ICAM, USS (PDC module), BDC_BODY2/3)

See this thread for more info: https://cartechnology.co.uk/showthread.p...608&page=2

(24-01-2024, 07:47 AM)egyclick Wrote:  Although in official bmw retrofit pdf it shows that Entrynav2 it supports 3AG, I haven't seen actually one with this navi + 3AG camera that works so unless you guys really came across, this makes me believe that it might not be suported and requires nbt evo head unit.

I've attached a picture of an X3 G01 made in 2018 with HU_ENTRYNAV2 and 6.5" screen with a rear-view camera. Unfortunately I don't have the VIN, but indeed it is possible and supported by BMW.


Attached Files Thumbnail(s)
   
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW BMW F34 LHD to RHD heated seats retrofit coding Schnitzer 2 21 4 hours ago
Last Post: Schnitzer
  G01 trailer hitch retrofit plugs kklobo 0 30 Yesterday, 21:50 PM
Last Post: kklobo
XZBMW Bmw 5,f10 radio problem RobertRexhaj 3 80 Yesterday, 18:47 PM
Last Post: Unspec
  Entrynav2 Component Protection gt678 19 2,555 Yesterday, 14:38 PM
Last Post: pshoey
XZBMW BMW CIC PATCHER v2 - GENERATE YOUR OWN RETROFIT FSC CERTS intel123 890 462,653 Yesterday, 13:08 PM
Last Post: NeRkO20
  Car Systems / Custom Retrofit Garage ENBT Adapter Ulsmak 33 1,469 27-03-2024, 00:17 AM
Last Post: painsage
  G30 LCI Headlights retrofit: High Beam Laser light locking active tcp443 19 3,217 26-03-2024, 21:25 PM
Last Post: Satia
  G05 KAFAS4 enable code missing after Retrofit ACC 6ergsm 19 2,307 26-03-2024, 12:33 PM
Last Post: Hodgsonp
  ISTA launcher problem Red_bean_bun 1 171 26-03-2024, 05:11 AM
Last Post: 2013m5
  Dme Cas synchronization Problem donjuan020 3 205 25-03-2024, 21:55 PM
Last Post: BmwMerc

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content