Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
09-01-2023, 14:10 PM,
Post: #161
|
|||
|
|||
RE: Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
Is idriver 6 possible in mini F60 2017 (id5)??, the Fa modification is necessary.
|
|||
01-03-2023, 19:46 PM,
Post: #162
|
|||
|
|||
RE: Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
|
|||
30-10-2023, 21:50 PM,
Post: #163
|
|||
|
|||
RE: Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
Third link was dead.
|
|||
08-11-2023, 02:55 AM,
Post: #164
|
|||
|
|||
RE: Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
Programming can override ID4 programs, but cannot set codes
|
|||
27-01-2024, 20:58 PM,
Post: #165
|
|||
|
|||
RE: Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
Hi guys. I've got an issue. Programmed with 18-03-532 istep on f80, all goes well. When I try to FDL code for apix settings listed in this post, FDL coding fails at 18% with Bimmerutility and then NBT loses VIN and VO locks. When I VO unlock, inject 18-03-532 CAFD all is fine but then try again to FDL code fails.
Type code is 8m92 for euro RHD and date is 07/18. I think I'm doing something wrong with FDL but I'm following instructions for the coding as written in this post. Any ideas? |
|||
27-01-2024, 21:03 PM,
Post: #166
|
|||
|
|||
RE: Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
(27-01-2024, 20:58 PM)OzzyHEH Wrote: Hi guys. I've got an issue. Programmed with 18-03-532 istep on f80, all goes well. When I try to FDL code for apix settings listed in this post, FDL coding fails at 18% with Bimmerutility and then NBT loses VIN and VO locks. When I VO unlock, inject 18-03-532 CAFD all is fine but then try again to FDL code fails. You need to run a VO fix feature code or manage this your self over SSH. I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
27-01-2024, 21:39 PM,
Post: #167
|
|||
|
|||
RE: Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
(27-01-2024, 21:03 PM)DayvG Wrote:(27-01-2024, 20:58 PM)OzzyHEH Wrote: Hi guys. I've got an issue. Programmed with 18-03-532 istep on f80, all goes well. When I try to FDL code for apix settings listed in this post, FDL coding fails at 18% with Bimmerutility and then NBT loses VIN and VO locks. When I VO unlock, inject 18-03-532 CAFD all is fine but then try again to FDL code fails. This is seperate to VO unlock feature code? |
|||
27-01-2024, 21:43 PM,
Post: #168
|
|||
|
|||
RE: Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
(27-01-2024, 21:39 PM)OzzyHEH Wrote:Same thing, I just said it different(27-01-2024, 21:03 PM)DayvG Wrote:(27-01-2024, 20:58 PM)OzzyHEH Wrote: Hi guys. I've got an issue. Programmed with 18-03-532 istep on f80, all goes well. When I try to FDL code for apix settings listed in this post, FDL coding fails at 18% with Bimmerutility and then NBT loses VIN and VO locks. When I VO unlock, inject 18-03-532 CAFD all is fine but then try again to FDL code fails. I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
27-01-2024, 21:48 PM,
Post: #169
|
|||
|
|||
RE: Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
(27-01-2024, 21:43 PM)DayvG Wrote:I've done this. It allows me to flash CAFD again to get coding back into unit, but then when I try to FDL code with new FDL it fails. I'm stuck in a loop(27-01-2024, 21:39 PM)OzzyHEH Wrote:Same thing, I just said it different(27-01-2024, 21:03 PM)DayvG Wrote:(27-01-2024, 20:58 PM)OzzyHEH Wrote: Hi guys. I've got an issue. Programmed with 18-03-532 istep on f80, all goes well. When I try to FDL code for apix settings listed in this post, FDL coding fails at 18% with Bimmerutility and then NBT loses VIN and VO locks. When I VO unlock, inject 18-03-532 CAFD all is fine but then try again to FDL code fails. |
|||
27-01-2024, 21:50 PM,
Post: #170
|
|||
|
|||
RE: Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA
Then you’re doing something wrong mate. Without knowing your steps or what you’re doing it’s impossible to know.
I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC BMW ISPI Admin Client License (Contact for info) Complete EntryNav2 FSC solution for Retrofit/Component Protection KAFAS2 7E/BE/BF KAFAS4 11F/13E/13F Carplay activations/FullScreen/ID4-5 EntryNav2 Carplay activations OEM/Provisioning Contact me for more information |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content