[Jalami]

Is idriver 6 possible in mini F60 2017 (id5)??, the Fa modification is necessary.

[ivansmail]

Is idriver 6 possible in mini F60 2017 (id5)??, the Fa modification is necessary.

Coding fdl in HUH- HMI_ID_VERSION

[grizzle]

Third link was dead.

[lantianbaiyun]

Programming can override ID4 programs, but cannot set codes

[OzzyHEH]

Hi guys. I've got an issue. Programmed with 18-03-532 istep on f80, all goes well. When I try to FDL code for apix settings listed in this post, FDL coding fails at 18% with Bimmerutility and then NBT loses VIN and VO locks. When I VO unlock, inject 18-03-532 CAFD all is fine but then try again to FDL code fails. 
Type code is 8m92 for euro RHD and date is 07/18. 
I think I'm doing something wrong with FDL but I'm following instructions for the coding as written in this post. 
Any ideas?

[DayvG]

Hi guys. I've got an issue. Programmed with 18-03-532 istep on f80, all goes well. When I try to FDL code for apix settings listed in this post, FDL coding fails at 18% with Bimmerutility and then NBT loses VIN and VO locks. When I VO unlock, inject 18-03-532 CAFD all is fine but then try again to FDL code fails. 
Type code is 8m92 for euro RHD and date is 07/18. 
I think I'm doing something wrong with FDL but I'm following instructions for the coding as written in this post. 
Any ideas?

You need to run a VO fix feature code or manage this your self over SSH.

[OzzyHEH]

Hi guys. I've got an issue. Programmed with 18-03-532 istep on f80, all goes well. When I try to FDL code for apix settings listed in this post, FDL coding fails at 18% with Bimmerutility and then NBT loses VIN and VO locks. When I VO unlock, inject 18-03-532 CAFD all is fine but then try again to FDL code fails. 
Type code is 8m92 for euro RHD and date is 07/18. 
I think I'm doing something wrong with FDL but I'm following instructions for the coding as written in this post. 
Any ideas?

You need to run a VO fix feature code or manage this your self over SSH.

This is seperate to VO unlock feature code?

[DayvG]

Hi guys. I've got an issue. Programmed with 18-03-532 istep on f80, all goes well. When I try to FDL code for apix settings listed in this post, FDL coding fails at 18% with Bimmerutility and then NBT loses VIN and VO locks. When I VO unlock, inject 18-03-532 CAFD all is fine but then try again to FDL code fails. 
Type code is 8m92 for euro RHD and date is 07/18. 
I think I'm doing something wrong with FDL but I'm following instructions for the coding as written in this post. 
Any ideas?

You need to run a VO fix feature code or manage this your self over SSH.

This is seperate to VO unlock feature code?

Same thing, I just said it different

[OzzyHEH]

Hi guys. I've got an issue. Programmed with 18-03-532 istep on f80, all goes well. When I try to FDL code for apix settings listed in this post, FDL coding fails at 18% with Bimmerutility and then NBT loses VIN and VO locks. When I VO unlock, inject 18-03-532 CAFD all is fine but then try again to FDL code fails. 
Type code is 8m92 for euro RHD and date is 07/18. 
I think I'm doing something wrong with FDL but I'm following instructions for the coding as written in this post. 
Any ideas?

You need to run a VO fix feature code or manage this your self over SSH.

This is seperate to VO unlock feature code?

Same thing, I just said it different

I've done this. It allows me to flash CAFD again to get coding back into unit, but then when I try to FDL code with new FDL it fails. I'm stuck in a loop

[DayvG]

Then you’re doing something wrong mate. Without knowing your steps or what you’re doing it’s impossible to know.