[immo1]

Hi All,

I am installing ODIS S 23 using original installer; After everything is installed including data, ODIS does not detect any interface. Looking at ODIS configuration, PDU API is missing. Even though the original installation went smoothly, I uninstalled and reinstalled with same result.

Can anyone please help ? I will pay.

[pupu144]

And do you have drivers installed for your device..?

If it's a J2534 device - these field will be empty. Only for device which support D-PDU API (ISO-22900-2) these fields would get populated.

[immo1]

And do you have drivers installed for your device..?

If it's a J2534 device - these field will be empty. Only for device which support D-PDU API (ISO-22900-2) these fields would get populated.

I'm using ori 6154, and that's what I selected during the installation.

It is not visible in ODIS, but PDU tester sees it and it works.

[justdiag]

Look at posetsetup files and there you will find vw pdu api jar file. Extract it with 7z and install it at hand the exe. Make sure the program is closed when you do it. Jar is around 75-80mb file.