[kokra]

You can check the ICOM if it connect to car and laptop.
Open IE with http://IP_OF_YOUR_ICOM:60080
User: root
Password:NZY1150263
Under Channel/Device Configuration you can find the ignition voltage.

[schwippschwapp]

Is there still wiring diagrams / schematics in there?

in rheingold

Sorry if im just too stupid, but in ISTA-D 3.44 i can find SPP ( Wiring Diagram) files. In 3.48 i just can't find them. Looking for Mini R50 Diagrams

[Dushki]

Works perfectly with me
thank you very much

[cnbc13]

Which program to use for the diagnosis of my BMW E91, 2008, CIC ?

[coriducu]

Which program to use for the diagnosis of my BMW E91, 2008, CIC ?

ISTA-D

[clubs07]

update: The Expert mode works fine after I updated to 3.55.4.000
The expert mode is broken in 55.0.300

Did you try to use the Expert mode?
I have the same package but I can not manage to flash a single module, all deselected modules from hide all actions, reappear before accept measures plan menu

Hello,

This software works with cable bmw inpa k+dcan ?
I have a version Rehingold 3.47.30 and work very good but in one model (bmw e91 320D 181cv software break. I think with an update resolves but i need find it

seems will work,it have newest Launcher v3.2 + Network tool,and if you follow the video,then you will see

[rex1982]

Is there wiring diagrams in french?

[miranri]

Ista/d when launch I get error, unit not register ... any help please ,, ista/p thruw the launcher works fine ,, ( not connected to the car yet.)

[bmwcode]

BMW NEXT ISTA/D 3.48.20 + ISTA/P 55.0.300




Operating system

Windows XP (32-bit or 64-bit)
Windows 7 (32-bit or 64-bit)
Windows 8 (32-bit or 64-bit)
Windows 8.1 (32-bit or 64-bit)
Windows 10 (32-bit or 64-bit)

Hardware requirements
Processor (CPU): Intel Pentium 2.0 GHz, Core Duo 1.0 GHz or better
Memory (RAM): 2 GB or more
Hard drive (HDD): 80 GB free space on disk C:

Interface requirements

BMW ISTA-D Rheingold: ICOM A1 or A2, OPPS, OPS, GT1, ENET cable, K-Dcan cable, K-Line cable
BMW ISTA-P: ICOM A1 or A2, OPPS, OPS, K-Dcan cable and ICOM emu (for E46,E39,E38,E53)

thank you , its so nice

[clubs07]

I spoke too soon about the Expert mode. It doesn't work, I can clear the ECUs from programming but if you have an ECU calling for replacement the Expert mode doesn't clear it, it pops up again before programming stage