[alex_cv]

Hi, I need help to correctly recalculate the mileage in the CAS4 and determine the correct writing procedure.

The car had a CAN filter installed. I removed it and corrected the mileage.

Based on the CAS EEPROM dump, two different calculators show 150,000 km, while Xhorse KTP5 and BMW ProTool (using a query similar to Tool32) show 7 km.

Also used instrument cluster was reset and coded to the vehicle because the EEPROM (160D0) was missing from the original cluster. There is no red dot currently displayed, but the mileage started from zero.

If I use Xhorse via OBD to set the mileage to 150,000 km in CAS, the red dot appears on the cluster. Restoring the backup removes the issue.

Dumps attached.

Thanks for any help.

f10.rar
File Type:
Downloaded:	8 times
Size:	273.28 KB

[dominpl]

Check this one and report

[alex_cv]

Check this one and report

didn't work. even when virginized again kombi and re-coded it got red dot

the only way i see is to set mileage in the kombi and reset km in cas