Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Xprog m to xprog box 5.50
20-09-2014, 10:21 AM,
Post: #11
|
|||
|
|||
RE: Xprog m to xprog box 5.50
Unfortunately, the second method also does not work.
|
|||
20-09-2014, 11:59 AM,
(This post was last modified: 18-04-2017, 21:12 PM by Clusters.)
Post: #12
|
|||
|
|||
RE: Xprog m to xprog box 5.50
Download original software version of xprog, now matter the version, install but dont connect the box, open software 1 time (original software) and then close, , then install meds... software with box connected, and try (with meds... software of couse ).
There are people trying to program xprog version 5.0, but you cant program nothing usually, because most of ATmega are locked with blow fuses, i try to do the same, no errors on programing, but when i read i only read trash, because ATmega is locked, i will buy a virgin ATmega and i will try all these process, iam shure it will work. |
|||
20-09-2014, 12:40 PM,
Post: #13
|
|||
|
|||
RE: Xprog m to xprog box 5.50
Already so I tried. I program atmega and I read and it's ok. Preferable to try yet.
|
|||
14-05-2015, 13:21 PM,
Post: #14
|
|||
|
|||
RE: Xprog m to xprog box 5.50
Thanks to all
my xprog-box not work i program atmega by another xprog-m not xprog-box ( device programed succeful ) but not work. write in popup (animalparadise ). pls help me. regards |
|||
15-05-2015, 21:59 PM,
Post: #15
|
|||
|
|||
RE: Xprog m to xprog box 5.50
Try and report
flash atmega eeprom & flash put your original drivers (is xprog m 5.o or box) execute my soft ver 5.55 don´t forget thank and rep ! |