Possibly Related Threads…

***marko.p*** · 03-12-2024, 17:46 PM,

Hi,

Can you please help me with immo off for the ECU.
Siemens
5WK9 022
DME MS41.0

The ECU was readed with Galletto 4.
Please check the dump and after immo off please create the checksum if needed.

The car with the ecu was an automatic transmission, and now I'm installing it in a car with a manual transmission. I don't know if it is possible to change that.

I will try to write it back again with Galletto 4.

Thanks

e36 ms41.rar
File Type:
Downloaded:	4 times
Size:	6.53 KB

***al70*** · 03-12-2024, 18:23 PM,

you need full read dump, 256kb

***matuuu*** · 03-12-2024, 18:31 PM,

done severals, and so far worked.
No pass!
Let me know if it work or not.

***marko.p*** · (This post was last modified: 03-12-2024, 19:52 PM by marko.p.)

I will report in 2 hours

my galletto says error SK1 sad

***matuuu*** · 03-12-2024, 19:57 PM,

Probably tool issue.

***al70*** · 03-12-2024, 20:32 PM,

you have round obd port ?

***marko.p*** · 03-12-2024, 21:54 PM,

(03-12-2024, 20:32 PM)al70 Wrote: you have round obd port ?

I have a converter from round obd to obd 2.

I read on the bench but I can't write!

***Vojno*** · (This post was last modified: 03-12-2024, 23:03 PM by Vojno.)

(03-12-2024, 21:54 PM)marko.p Wrote:
(03-12-2024, 20:32 PM)al70 Wrote: you have round obd port ?

I have a converter from round obd to obd 2.

I read on the bench but I can't write!

Could it be that it needs a programming voltage?
There is a dedicated pin on the round connector for this! (maybe the pin18)
On MS41.0 ECU connector the programing pin is the pin60!

(03-12-2024, 22:57 PM)Vojno Wrote:
(03-12-2024, 21:54 PM)marko.p Wrote:
(03-12-2024, 20:32 PM)al70 Wrote: you have round obd port ?

I have a converter from round obd to obd 2.

I read on the bench but I can't write!

Could it be that it needs a programming voltage?
There is a dedicated pin on the round connector for this! (maybe the pin18)
On MS41.0 ECU connector the programing pin is the pin60!

I remembered it well:

***marko.p*** · 04-12-2024, 08:12 AM,

(03-12-2024, 22:57 PM)Vojno Wrote:
(03-12-2024, 21:54 PM)marko.p Wrote:
(03-12-2024, 20:32 PM)al70 Wrote: you have round obd port ?

I have a converter from round obd to obd 2.

I read on the bench but I can't write!

Could it be that it needs a programming voltage?
There is a dedicated pin on the round connector for this! (maybe the pin18)
On MS41.0 ECU connector the programing pin is the pin60!

(03-12-2024, 22:57 PM)Vojno Wrote:
(03-12-2024, 21:54 PM)marko.p Wrote:
(03-12-2024, 20:32 PM)al70 Wrote: you have round obd port ?

I have a converter from round obd to obd 2.

I read on the bench but I can't write!

Could it be that it needs a programming voltage?
There is a dedicated pin on the round connector for this! (maybe the pin18)
On MS41.0 ECU connector the programing pin is the pin60!

I remembered it well:

on the ecu connector, pin60 is +12v, I know that... today I will try to connect pin 20 (20 pin -> obd2) to the car and via obd to galletto... and pin 18 should be +12v

***al70*** · 12-12-2024, 21:53 PM,

Everything ok Marko ?

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Peugeot Bipper ecu edc16c34 réf 0281014444 Immo Off	Tchook	2	28	2 hours ago Last Post: Le-Mans
	VAG Simos PCR2.1 Immo off	mainecoon6	1	29	2 hours ago Last Post: ROD-BENDERS
	DQ200 G2 immo off needed	vaki1989	2	49	2 hours ago Last Post: sosinfo
	Changing-IMMO-Data-for-Audi-Q5-Transmission from bcm to dl501	sindy	0	43	2 hours ago Last Post: sindy
	DAF immo off	spanaz1	3	331	3 hours ago Last Post: khaledDsfk
	Edc17c74 SHE immo off solution	pankluczyk	3	48	4 hours ago Last Post: ROD-BENDERS
	NEED Immo off Ssangyong Actyon	ILDIRA	8	957	6 hours ago Last Post: gogost
	passat pcr2.1-immo off	al70	9	427	8 hours ago Last Post: danyguit2000
	BMW E46 immo off solution	dankocg	7	166	9 hours ago Last Post: dankocg
	Solved ✔ PPD1.2 Clone/ Immo off	puko55	5	181	Yesterday, 11:20 AM Last Post: al70

Contact Us