Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Rove Freelander MS43/KV6
15-09-2015, 13:04 PM,
Post: #1
|
|||
|
|||
Rove Freelander MS43/KV6
Hi, I need immo off Rover Freelander ECU MS43 / KV6.
someone has to help? |
|||
15-09-2015, 19:23 PM,
Post: #2
|
|||
|
|||
RE: Rove Freelander MS43/KV6
Only ECU + EWS paired files... Ypou have to remove a few bytes from old EWS.
Or you have black immo box based on PIC? |
|||
16-09-2015, 12:57 PM,
Post: #3
|
|||
|
|||
RE: Rove Freelander MS43/KV6
Thanks for the answer.
Is yes, I want to simulate the counter test the ECU without immo. this freelander was damaged without nozzle and coil signal, so I want to leave with immo off to test the ECU. The immo this ECU is the eprom 93c86? |
|||
17-09-2015, 08:44 AM,
Post: #4
|
|||
|
|||
RE: Rove Freelander MS43/KV6
Its unreal to make it without immo.
If you just want to change ECU - have to remove FLASH + 93C86 from old one. |
|||
01-10-2015, 16:04 PM,
Post: #5
|
|||
|
|||
RE: Rove Freelander MS43/KV6
Right. the best would be to reprogram the key.
It is that I thought I had to reprogram tool and I'm not. I used another ECU replacing the 93c86 and continues without coil signal and beak. I use a lot and I ZEDBULL the launch. |
|||
13-11-2018, 21:08 PM,
Post: #6
|
|||
|
|||
RE: Rove Freelander MS43/KV6
Hi, iam brazIlian. My car is a Freelander KV6 NAS with MS43. I would like to know if someone can help me.
I need reprogramming ECU. i don't have programs and archives for Siemens VDO MS43 and for JACTO FPO ATCU. |