[pumuk]

Hello

First of all, I'm sorry if it is not the right place to put this post.

I decided to create it because I'm desperate to activate the browser in the car.

It is a audi q3 2013, if I remember correctly is the 3G MMI +

Bring the conectivity package, so I'd have maps locate the firmware + + activator.

I have tried the steps and putting the files of another post on this site but in step of engineering in the MMI and then placing the ssd in slot 1 and give update will not let me, I get a message on the screen that says no SSD can read.

Please help.

[rostamx]

Hello

First of all, I'm sorry if it is not the right place to put this post.

I decided to create it because I'm desperate to activate the browser in the car.

It is a audi q3 2013, if I remember correctly is the 3G MMI +

Bring the conectivity package, so I'd have maps locate the firmware + + activator.

I have tried the steps and putting the files of another post on this site but in step of engineering in the MMI and then placing the ssd in slot 1 and give update will not let me, I get a message on the screen that says no SSD can read.

Please help.

Have you formatted the SD card with NTFS or Fat32?

All files need to be in the root of the SD card not in a separate folder.

[pumuk]

Hello

First of all, I'm sorry if it is not the right place to put this post.

I decided to create it because I'm desperate to activate the browser in the car.

It is a audi q3 2013, if I remember correctly is the 3G MMI +

Bring the conectivity package, so I'd have maps locate the firmware + + activator.

I have tried the steps and putting the files of another post on this site but in step of engineering in the MMI and then placing the ssd in slot 1 and give update will not let me, I get a message on the screen that says no SSD can read.

Please help.

Have you formatted the SD card with NTFS or Fat32?

All files need to be in the root of the SD card not in a separate folder.

if you format the SD card to FAT 32, and put all the files and put a guide.