Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Flash e-series CIC to v41 software, BMW Apps without FSC
07-10-2018, 15:58 PM, (This post was last modified: 13-10-2018, 16:26 PM by 555md.)
Post: #141
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
Hello guys , I tried to flash my cic to v41 and I have this error message , 



Attached Files Thumbnail(s)
           
Quote this message in a reply
06-12-2018, 17:41 PM,
Post: #142
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
Hi

I have already updated SP data on coding tools, but I can not find these files. can someone please provide me with a link?

I can not find Date, program and NAAB

63:
-PABD = 01010406ch63f1.ipo
-P-SGBD = 11FLASH4.prg
-Data = A9257076.0da
-Programm = 9257075A.0pa
-NAAB = H0172I2_0172J9.0ba

62:
-PABD = 01010406ch62f1.ipo
-PBO4.404
-Daten = A9257086.0da
-Programm = 9257085A.0pa
-NAAB = H0172IY_0172JA.0ba

A0:
-PABD = 01010402cha0f1.ipo
-P-SGBD = 11FLASH4.prg
-Programm = 9257088A.0pa
Quote this message in a reply
31-01-2019, 05:51 AM, (This post was last modified: 31-01-2019, 06:44 AM by ovidiubuzzi.)
Post: #143
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
(29-01-2016, 00:08 AM)nachin11 Wrote:  The CIC is working again happy

The trick has been to program it with ISTA-P in an E90 car with CIC from factory.
 

Hi can you program with Ista p if is not the same vin as the car? I did a retrofit on my e 60 with cic from ccc and ista can not program the new cic .....do you have any idea?

(20-09-2015, 01:33 AM)ap90500 Wrote:  This is for ECE/US CIC, not for Asian variants.

How to flash E-series CIC to V41 and get BMW Apps without FSC:

Prequisities: You must know how to use WinKFP. You also must have some knowledge about WinKFP expert mode. Interface must be ICOM A + B (or OP(P)S). No matter what you read from internet or hear from someone else, K+DCAN can not be used. Do not even try, it will fail for sure. Also your Ediabas must have all files for flashing modules. There is no need for WinKFP ecu-files. I recommend you to download (v41 or post) sp-daten and do "update sp-daten" with bmw coding tool.

Update must be done module by module. Correct order is 63, 62, A0. All modules can be flashed with MOST_ASYNC_ab625.

Download included package and extract it. CIC has three modules: 63, 62 and A0. 63 and A0 is the same for all chassis models so there is just one folder for each. 62 (gateway) has a different software for every chassis model so correct folder must be chosen. Chassis models are E60 (including E60, E61, E62, E63), E89 (including E8x and E9x) and E70 (including E70 and E71). Choose correct folder for 62.

Copy three folders (develop_63, develop_62_exx, develop_a0) to c:\ec-apps\nfs\data

There are three modules to flash. 63 is the first one. Go to c:\ec-apps\nfs\data and rename "develop_63" to "develop".

63:

-Configure ICOM for MOST_ASYNC_ab625
-Open WinKFP
-Select expert mode
-PABD = 08010408CI63F1.ipo (be carefully, do not choose CM63)
-P-SGBD = 33CI63F1_10.prg (be carefully, do not choose CM63)
-ECU-adress = 63
-Data = A9257174
-Program = 9257170
-NAAB = H020270_0202J5

WinKFP will complain about incorrect files and other things when you select the files, just ignore the complaints.

Now select done and you will get back to main menu. Now everything is ready for flash (also you have power supply connected, ignition on and cd/dvd removed from CIC). At this point you can turn on windows task manager (taskmgr.exe) because WinKFP progress meter will not work when flashing cic. Select "Program NAAB" and bootloader flash starts. CIC goes to bootloader mode and fan spins at full speed, this is normal. Screen shows bootloader picture or turns black, depending on old firmware version. Now you must be patient because the meter is not working. It will go to 100% and do all kind of things, just wait until "bootsector update finished" appears. Next select program program. Same precautions for this, it takes around 30 minutes to flash 63 program. After program programming has finished, select program data.

62:

Now you have flashed 63. Next you must flash 62. Go to c:\ec-apps\nfs\data and delete develop folder. Then rename develop_62_exx to develop. Go back to list on 63: on this guide. Configure WinKFP just like on that list, except change three bolded 63's to 62. Also select new data, program and NAAB files. If you did the folder swap (delete develop folder, rename develop_62_exx -> develop) correctly, there are just the correct files available. Select done and perform flash in the same order: NAAB, program, data. 62 is quite fast to flash, maybe five minutes for each part.

A0:

Now you know how to do this. Only difference is that A0 has only program, not data or NAAB. Delete old develop folder, rename develop_a0 to develop. Go again back to list on 63 on this guide, change three bolded 63's to A0. On this module you can't select data or NAAB, just select program and then select done. Choose program program. It takes around 30 minutes to program A0. After this, you have flashed your CIC to v41 and will get FSC-free BMW Apps.

After programming, code your CIC with NCS Expert.



Great tutorial!But what about if i wanted to update the cic to the latest version so i can patch for fsc code install.Still the same procedure but newer spdaten?thank you

I hope that this helps someone smile.
Quote this message in a reply
31-01-2019, 10:57 AM,
Post: #144
XZBMW  RE: Flash e-series CIC to v41 software, BMW Apps without FSC
(31-01-2019, 05:51 AM)ovidiubuzzi Wrote:  
(29-01-2016, 00:08 AM)nachin11 Wrote:  The CIC is working again happy

The trick has been to program it with ISTA-P in an E90 car with CIC from factory.
 

Hi can you program with Ista p if is not the same vin as the car? I did a retrofit on my e 60 with cic from ccc and ista can not program the new cic .....do you have any idea?


$6VAA- Adding to the package CIC speechless

VIM HU_MGU-instruction for esys.
BMW FSC map update/CIC/NBT/NBTevo/EntryNav(Route)
BMW FSC retrofit full set:
CIC/NBT/NBTevo id4/5/6 screen mirroring
Changing region map for EVO  id 4/5/6+FullScreen apple carplay
Quote this message in a reply
31-01-2019, 20:47 PM,
Post: #145
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
#0308 for $6VAA
Quote this message in a reply
13-02-2019, 10:20 AM,
Post: #146
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
Hello how do you modify ediabas.ini for the MOST_ASYNC_ab625 or the easy connect will do this by itself.Thank you
Quote this message in a reply
13-02-2019, 14:39 PM,
Post: #147
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
Ok so i figured out how to do it but i have a question.How do i choose the NAAB file?Since a have a lot of NAAB files in my list?Thank you
Quote this message in a reply
14-02-2019, 06:57 AM, (This post was last modified: 14-02-2019, 06:58 AM by ovidiubuzzi.)
Post: #148
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
MY E60 parts are: I did a retrofit from CCC and wanted to update to .C1A version from .C09


63:
9223229

62:
9223240

A0:
9223243


How can i chose NAAB parts?I found on this forum a chart that it will be _0202JP for 63 and _0202JQ for 62.Can someone confirm that or maybe give an advice and a clue on how to chose those files?Thank you
Quote this message in a reply
22-03-2019, 02:43 AM, (This post was last modified: 22-03-2019, 02:51 AM by Pi26.)
Post: #149
RE: Flash e-series CIC to v41 software, BMW Apps without FSC
(14-02-2019, 06:57 AM)ovidiubuzzi Wrote:  MY E60 parts are: I did a retrofit from CCC and wanted to update to .C1A version from .C09


63:
9223229

62:
9223240

A0:
9223243


How can i chose NAAB parts?I found on this forum a chart that it will be _0202JP for 63 and _0202JQ for 62.Can someone confirm that or maybe give an advice and a clue on how to chose those files?Thank you
can't answer, you don't tell area so you can verify using Win Kfp in comfort mode to see what Ref it shows for each one (63-62-A0) without flashing these is safe.

(13-02-2019, 10:20 AM)ovidiubuzzi Wrote:  Hello how do you modify ediabas.ini for the MOST_ASYNC_ab625 or the easy connect will do this by itself.Thank you
Before starting WinKfp, start easyconnect knowing the IP of the Icom.
And don't use ista/P as this is a retrofit and you can't handle the data version, READ before all is rightly described.
Cloned Icom are sh*ts about the optical part believe me, even Under warranty the chinese didn't repair mine.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Making F-series combox work in e-series Ryn079 1 132 5 hours ago
Last Post: Marx
XZBMW Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA FSCmap 183 51,613 25-03-2024, 18:58 PM
Last Post: DayvG
XZBMW E84 X1 25d with 8hp45x how to flash Alp*na or other EGS hasn38 0 86 23-03-2024, 00:26 AM
Last Post: hasn38
  mileage g series virtual bosch id7 tigre 2 216 22-03-2024, 13:00 PM
Last Post: tigre
  mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom matiz 10 1,462 22-03-2024, 11:47 AM
Last Post: urgi
XZBMW G Series KEY in F34 Rajco 5 362 20-03-2024, 18:56 PM
Last Post: Rajco
XZBMW DKOMBI2 G12 FLASH DUMP sebastianfernandes 2 229 03-03-2024, 06:46 AM
Last Post: sebastianfernandes
XZBMW BMW G8X xDRIVE CS SOFTWARE mrpetesingh 2 324 02-03-2024, 22:24 PM
Last Post: mrpetesingh
XZBMW software name reminder Senjorq97 6 410 02-03-2024, 18:45 PM
Last Post: Hoborg
XZBMW BMW G8x M3/M4 CSL EGS flash weby 21 3,210 01-03-2024, 10:20 AM
Last Post: TRLK

Forum Jump:


Users browsing this thread:
3 Guest(s)

Return to TopReturn to Content