[Bulent68]

Hi, I need help for following error codes. How can I know what the fault is? Faults return after cleaning. I use BimmerLink for reading. My car is BMW F10 520D.

Junction Box Module

030115: Window driver-side rear: invalid characteristic, no standardization exists
INFO 002040: Pdc: reset due to watchdog timeout
INFO 002044: K-LIN 5: desynchronization LIN management
INFO 002045: K-LIN 7: desynchronization LIN management
INFO 002031: Vsm: event vehiclestate

Integr. Chassis Module

INFO 482656: Slip angle estimator - internal degradation due to sbs
INFO 4827B3: Controller internal - under voltage at terminal 30
INFO 48276E: AUTOSAR - standard core - non-volatile memory - failed integitaet

Central Gateway

INFO 100204: Botschafts monitoring: failed system context signal
INFO 101008: Not resolvable ambiguous routing - sg is not in the target table svt
INFO 100104: HW weckgrund zgw

Air conditioning

INFO 780022: Nvm e integrity failed

Instrument cluster

INFO 93003F: Sender node: error in function addressed

[al70]

are the faults causing any issues ? do you have a good battery installed in the car ?

[Bulent68]

are the faults causing any issues ? do you have a good battery installed in the car ?

Car has 2 problems, Headlight right inside lens is not clear and right door does not lock or unlock. Battery is good is original from BMW.

[al70]

well, id start by disconnecting both of those and see what faults you have, could be water damage in the rear door causing all the issues

[Bulent68]

Is there a site for info memory or a software?

[vld]

Check the car with ISTA and follow the test plan.

[Node]

NONE of those info codes are in ISTA database so I'm pretty sure it would deem them bogus and ignore completely. So you will have to do your leg work and DIAGNOSE your issues yourself MANUALLY.