[dodis]

Hi,
Need advice or help/ELV off  with 02811 fault and no ignition.

Tryed another ELV, (write dump from original to donor) the same fault.
Turned off ELV with abrites, all the same.
There is no ELV as subsystem in the scan. 
Hardware problem or need bcm dump repair ?

                Address 05: Acc/Start Auth.      Labels: 8K0-907-064-05.clb
Control Module Part Number: 4H0 907 064 AP    HW: 4H0 907 064 AP
  Component and/or Version: BCM2 2.0      H24 0217
          Software Coding: 01AA3000000000000000
            Work Shop Code: WSC 02391 785 00200
                      VCID: 77BECB76C6DDF62EFA-8022
1 Fault Found:

02811 - Control Module for Electronic Steering Column Lock (J764)
            014 - Defective - MIL ON
            Freeze Frame:
                    Fault Status: 11101110
                    Fault Priority: 1
                    Fault Frequency: 1
                    Reset counter: 23
                    Mileage: 278826 km
                    Time Indication: 0
                    Date: 2024.12.31
                    Time: 00:05:12

P_D flash.rar
File Type:
Downloaded:	3 times
Size:	363.12 KB

[ROD-BENDERS]

Hi,
Need advice or help/ELV off  with 02811 fault and no ignition.

Tryed another ELV, (write dump from original to donor) the same fault.
Turned off ELV with abrites, all the same.
There is no ELV as subsystem in the scan. 
Hardware problem or need bcm dump repair ?

                Address 05: Acc/Start Auth.      Labels: 8K0-907-064-05.clb
Control Module Part Number: 4H0 907 064 AP    HW: 4H0 907 064 AP
  Component and/or Version: BCM2 2.0      H24 0217
          Software Coding: 01AA3000000000000000
            Work Shop Code: WSC 02391 785 00200
                      VCID: 77BECB76C6DDF62EFA-8022
1 Fault Found:

02811 - Control Module for Electronic Steering Column Lock (J764)
            014 - Defective - MIL ON
            Freeze Frame:
                    Fault Status: 11101110
                    Fault Priority: 1
                    Fault Frequency: 1
                    Reset counter: 23
                    Mileage: 278826 km
                    Time Indication: 0
                    Date: 2024.12.31
                    Time: 00:05:12

this may not work because you are missing sync data

br

[dodis]

Can sync disappear by itself ?
I am not sure that someone could not change elv before me.
Possible to have a look by the elv dump ?

[ROD-BENDERS]

this is A7 bcm2

without sync data useless

try fix... but if not work you need sync data

[dodis]

Fix didn't help.  I'm thinking, can it be wiring problem, because measuring block shows Lin-Databus status 0.

If not, what is the best way for synchro data ? All known for me geko providers are down..

[ROD-BENDERS]

Fix didn't help.  I'm thinking, can it be wiring problem, because measuring block shows Lin-Databus status 0.

If not, what is the best way for synchro data ? All known for me geko providers are down..

try poldiag they can do by vin

Br

[dodis]

Unfortunately Poldiag Sync Data service - "Unavailable due to reasons beyond our control. We are working on resolving the issue".

Thank you anyway

[ROD-BENDERS]

Only other way is make full reads of the TCU , Engine ecu, elv you have... post them here

[lupu_sandu]

Dodis you don't have a valid key for this car?

[dodis]

Dodis you don't have a valid key for this car?

The key is valid.