[Yah]

BMW E60 KMM 1027 ERROR DURING MEASURES PLAN CALCULATION_2015-09-22

Does anyone know how to fix this issue, my KOMBI was flashed with Winkfpt to match the Vin number of the chassis am working on, so the mile data was erased. now the mileage data cant be read by ISTA-P nor can the CAS3 module read it out. So I'm wondering if the KMM 1027 error is related to that? The DME does not show Vin nor its ZB nu,mber in inpa UIF block. The DME was ordered from the dealer.

I look up in winkfpt pdf document that KMM stand for Konfiguration Management.


Can anyone tell me if the mileage data is necessary to program the MSV80 DME?
My CAS3 module programmed & Encoded OK via ISTA-P. From this module the Vehicle Order has been reading from but no mileage data is been read from it. the mileage shows 0km.
Look at the picture below:

[masa52]

You will not set vin in kombi or cas using Winkfpt

[Sabreace]

You will not set vin in kombi or cas using Winkfpt

Yes it's not possible to write vin to Kombi or CAS by Winkfpt