Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

[QUESTION] ISTA-P 3.56.4 FSC Codes Deleted
26-09-2015, 18:28 PM,
Post: #1
XZBMW  [QUESTION] ISTA-P 3.56.4 FSC Codes Deleted
Hi.

I started a programming session yesterday to reprogram a used SGM module to a 05 E60, and the programming went great. All successfully programmed but when I started the programming session ISTA started trying to download FSC codes for Voice Control. This progressbar never went away and I did not have the FSC codes on a usb drive. This resulted in that part of the measures plan being skipped and Voice Control no longer workind, SWT state in ISTA says that no FSC is loaded.

On earlier versions of ISTA-P it re-used the old FSC codes, this is even told in the manual that it will use the old codes unless a replace/repair has been carried out on the CCC/CIC/NBT.

On an F31 i also updated it saved and tried to reupload the FSC codes on the CIC-MID but the reupload failed. Even though the FSC status in ISTA was still accepted and loaded.

Is this a new change in ISTA-P? That all FSCs has to be reuploaded?

Thanks smile

//SweetBMW
Quote this message in a reply
26-09-2015, 18:45 PM,
Post: #2
RE: [QUESTION] ISTA-P 3.56.4 FSC Codes Deleted
Did you program CCC? CCC looses voice command FSC if you flash it. There is a DVD available in internet that has all fsc code up to 3/2007. Google for fsc_up_to_2007_03.
Reputation: +1 - SweetBMW [+1]
Quote this message in a reply
[+] 2 users say Thank You to ap90500 for this post
26-09-2015, 19:06 PM,
Post: #3
RE: [QUESTION] ISTA-P 3.56.4 FSC Codes Deleted
Yes CCC was programmed. But i was under the impression that ISTA-P would save the FSC. Oh well.

Found it here on another thread, so will get the car back tomorrow... smile

Thank you for quick reply!
Quote this message in a reply
27-09-2015, 14:09 PM,
Post: #4
RE: [QUESTION] ISTA-P 3.56.4 FSC Codes Deleted
BTW I would not flash CCC when replacing SGM or some other airbag system module. Actually I never flash CCC without a very good reason, it takes lots of time and is quite risky to flash.
Quote this message in a reply
27-09-2015, 14:56 PM,
Post: #5
RE: [QUESTION] ISTA-P 3.56.4 FSC Codes Deleted
(27-09-2015, 14:09 PM)ap90500 Wrote:  BTW I would not flash CCC when replacing SGM or some other airbag system module. Actually I never flash CCC without a very good reason, it takes lots of time and is quite risky to flash.

My original plan was not to flash the CCC, but when I chose that modules were replaced and chose SGM it would flash the entire car. Could not just select the SGM.
It wouldnt allow me to remove measures that had to do with programming.

I could have just flashed it with Winkfp and code it with ncs then start system time, but I was working on more cars at the same time. ista is automatic smile

Thanks man.
Quote this message in a reply
27-09-2015, 16:08 PM,
Post: #6
RE: [QUESTION] ISTA-P 3.56.4 FSC Codes Deleted
Did you try without selecting control unit replaced? I have never tried it on SGM, I always use winkfp for it and now I am wondering if it would work with ista. Some weeks ago I flashed e60 from normal to sport auto. Owner had replaced the GWS and I forgot it. Flashing of both EGS and GWS went smoothly without selectin control units replaced.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Lowering g05 lci with ista Zenel6GT 1 13 14 minutes ago
Last Post: Node
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,655 628,170 38 minutes ago
Last Post: CarlosF11
  ista 4.46 Standalone kiranabc 33 3,153 Yesterday, 19:51 PM
Last Post: Siki78
  ista for use whit vcx se db8000 0 47 Yesterday, 15:28 PM
Last Post: db8000
  Disable CC messages relating to a CC-ID codes TheNine90 102 13,409 Yesterday, 11:10 AM
Last Post: Wibbles
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 377 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,418 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,498 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 137 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 170 26-03-2024, 05:11 AM
Last Post: 2013m5

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content