Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
30-09-2015, 20:05 PM,
Post: #1
MChevrolet  I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
I would greatly appreciate anyone that can calc this
its a dump from a 07 lucerne 95040 chip in cluster
i need 96k on it i just cant find a calc anywhere it currently has 171 or so on dump
Quote this message in a reply
01-10-2015, 01:16 AM,
Post: #2
RE: I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
(30-09-2015, 20:05 PM)proaudio Wrote:  I would greatly appreciate anyone that can calc this
its a dump from a 07 lucerne 95040 chip in cluster
i need 96k on it i just cant find a calc anywhere it currently has 171 or so on dump

Try this and report, when you post "or so" you'll get "or so".

Better to post exact mileage, and if it's miles or km.


Attached Files
96k.zip
File Type: .zip
Downloaded: 14 times
Size: 338 bytes


If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Reputation: +1 - proaudio [+1]
Quote this message in a reply
[+] 2 users say Thank You to Clusters for this post
01-10-2015, 02:10 AM, (This post was last modified: 01-10-2015, 02:13 AM by proaudio.)
Post: #3
RE: I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
Was this done with a Calc for a LUCERNE
I just don't wanna put a dump with a Calc from something else on cause it's a pain to the car down here the numbers don't have to be exact

And thanks a million for helping by the way.
I much appreciate it. You know my next question is what's a brother gotta do to get that Calc off you smile
Quote this message in a reply
01-10-2015, 02:27 AM,
Post: #4
RE: I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
Done with a hex calculator and brain.exe.

If you have the cluster, power it on the bench to test it.

Ignition Pin 20
Battery Pin 10
Ground Pin 5

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Quote this message in a reply
[+] 4 users say Thank You to Clusters for this post
01-10-2015, 03:34 AM,
Post: #5
RE: I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
Ahha I'm assuming brain.exercise is a funny. I guess my question if you did it with no Calc how did you figure out where the lines were that had the miles in it
Quote this message in a reply
01-10-2015, 03:53 AM,
Post: #6
RE: I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
Experience doing a lot of GM products, and not just with a script or machine.

That cluster and a lot of other GMs, the miles are in the first two lines repeated three times.

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Reputation: +1 - proaudio [+1]
Quote this message in a reply
[+] 4 users say Thank You to Clusters for this post
01-10-2015, 04:58 AM,
Post: #7
RE: I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
Damn it is frigging new it is new it. I was looking at it and I seen in the middle was the vin. I told my buddy I know it's in these first two lines right the a1 da da da. Dang man. Thanks again I'll try tomm and let ya know
Quote this message in a reply
02-10-2015, 00:30 AM,
Post: #8
RE: I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
Ok so you the man your Calc was spot on 95890
But. On the downside for future reference
The digiprog and the upausb were unable to write to the 95040
For whatever reason they could read it but not write it so my solution. I yanked a atmel212 chip out of a trailblazer wrote the dump you gave me to it as 95020 and it wrote and worked perfect. Thanks a million again
Quote this message in a reply
[+] 2 users say Thank You to proaudio for this post
02-10-2015, 00:39 AM,
Post: #9
RE: I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
Did you save to old chip? Try writing it as S95P02.

Edit: By the way, your old mileage must have been around 177, 200. Next time please post exact original mileage.

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Reputation: +1 - proaudio [+1]
Quote this message in a reply
[+] 4 users say Thank You to Clusters for this post
02-10-2015, 04:30 AM, (This post was last modified: 02-10-2015, 05:07 AM by proaudio.)
Post: #10
RE: I have dump from a 07 lucerne i cant calc it anyone out there with a calc for it
I will sorry it was hearsay I didn't have cluster in my shop
I did try writing original chip as 95020. It would only read as 95040 how I got the dump off it. But wouldn't write as 95040 95020 95080 nothing thanks again

Hard to read the chip I think it said atmel 550
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
PCitroen Peugeot Citroën BSI flash dump collection volavka 88 83,184 22-02-2024, 09:17 AM
Last Post: iProg-carradio
  need full dump renault master Rh580 2020 riad3131 0 109 18-02-2024, 13:00 PM
Last Post: riad3131
ZVW VW T5 2008 VDO 7H0 920 860 E eeprom dump Insyncjoe 0 161 22-12-2023, 15:41 PM
Last Post: Insyncjoe
  Solved ✔ Help need dash dump YARIS s93c56 with miiror inside immokill 5 397 12-11-2023, 16:59 PM
Last Post: Clusters
PPeugeot Need good dump for Dash Peugeot 206 year 2006 automatic transmission YOI.OBD2 0 173 07-11-2023, 16:28 PM
Last Post: YOI.OBD2
  Honda JAZZ III dash dump carradio 0 223 04-11-2023, 03:25 AM
Last Post: carradio
  toyota axio 83800-12x11 dash dump patrickshani31 0 268 30-10-2023, 14:50 PM
Last Post: patrickshani31
  Solved ✔ Focus C max cluster virgin dump needed please Julesd 5 398 18-10-2023, 18:52 PM
Last Post: Julesd
  Full dump BSI need SINSET 3 418 12-10-2023, 20:15 PM
Last Post: SINSET
  Focus 3 - need odometer correction by dump roanoke 1 271 12-10-2023, 10:58 AM
Last Post: Clusters

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content