[strikeforce]

Please any help on xprog pinout for civic immo mc68hc05b6 in circuit reading.

[atay20]

MC68HCO5B6 page 9

[strikeforce]

Well I was wondering perhaps if I could get the pinout directly on the pcb board not on the chip terminals. I am not good in soldering and the last time I tried soldering the wires on the chip terminals some always came loose before I could finish the rest and I have to start all over without sucess. If I could lay my hand on such immo box I will try to trace the circuit and map the pinout on the pcb.

[alphaproline]

I preffer using Honda immo emulator if 2001

[strikeforce]

Customers prefer to have the transponder still active in their cars than killing it.

[strikeforce]

Well I have finally solved my problem with HC05 chip. this chip had been a pain in the ass reading it incircuit and to be frank I have end up damaging a couple of immo units reading incircuit. So I resort to desoldering the chip and reading it onboard, and it always came out with a successful read out. however, soldering it back is always a problem because I have never got it to work, at the end I had to swallow my pride and take the job to someone else who can read it incircuit and sucked me dry without making any dime out of the job. So today I found a solution to my problem by using plcc adapter I can desolder the chip and then solder the plcc adapter on the immo box and then it is easy to insert the chip on the plcc adapter. I have tried this method today on a civic 99 UK with HC05 and id33 chip and I am happy to report that it worked perfectly. this method I believed can also be applied to tms chips and others.
see photo of the adapter.