Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

How to Read FIS Module
25-09-2013, 14:54 PM, (This post was last modified: 27-09-2018, 01:08 AM by volavka.)
Post: #1
ZVW  How to Read FIS Module
How to Read FIS Module

Read internal i2c memory to get original code

Clip Pinout:
Port2.1 - VCC ( +5V )
Port2.2 - SCL ( clock )
Port2.3 - SDA ( data input/outout )
Port2.7 - GND ( ground )

P.S Read FIS as 24C16,24C32,24C64




[Image: fis_type1.jpg]

[Image: fis_type2.jpg]

[Image: fis_type3.jpg]

[Image: fis_type4.jpg]
Reputation: +2 - niko [+1] , barto39 [+1]
Quote this message in a reply
[+] 38 users say Thank You to Bonus for this post
26-11-2013, 14:14 PM,
Post: #2
RE: How to Read FIS Module
I did read with PonyProg2000 look here
be easy
[Image: 619492382.jpg]
Reputation: +2 - wieslov [+1] , barto39 [+1]
Quote this message in a reply
[+] 22 users say Thank You to nigrou for this post
23-09-2014, 19:08 PM,
Post: #3
ZVW  RE: How to Read FIS Module
Hi! I have VW radio navigation Blaupunkt 7 612 002 622 7L6035 191 NX.
I have connected the device to PonyProg with SCL, SDA and groung. Please tell me: the power 5V to 24c32 must be served from outside with turned off device? Or from internal power supply? Thank You!
Quote this message in a reply
[+] 3 users say Thank You to alexandr1966 for this post
23-09-2014, 20:50 PM,
Post: #4
RE: How to Read FIS Module
Connect GND SCL SDA from programer
connect NAVI 3x+ and gnd
turn navi on wait 10 sec until on display CODE or SAFE
read FIS
good luck
Quote this message in a reply
[+] 5 users say Thank You to audiopoint for this post
24-09-2014, 07:51 AM,
Post: #5
RE: How to Read FIS Module
(23-09-2014, 20:50 PM)audiopoint Wrote:  Connect GND SCL SDA from programer
connect NAVI 3x+ and gnd
turn navi on wait 10 sec until on display CODE or SAFE
read FIS
good luck
Thanks for your answer. I read FIS module as 24c32 - right? Or should read as 24c64?
Quote this message in a reply
24-09-2014, 11:52 AM,
Post: #6
RE: How to Read FIS Module
(24-09-2014, 07:51 AM)alexandr1966 Wrote:  
(23-09-2014, 20:50 PM)audiopoint Wrote:  Connect GND SCL SDA from programer
connect NAVI 3x+ and gnd
turn navi on wait 10 sec until on display CODE or SAFE
read FIS
good luck
Thanks for your answer. I read FIS module as 24c32 - right? Or should read as 24c64?

depence of model of navi usually 24c32
anyway send dump that you read some of "GA experts" will look
Quote this message in a reply
08-12-2015, 15:09 PM,
Post: #7
RE: How to Read FIS Module
(24-09-2014, 11:52 AM)audiopoint Wrote:  
(24-09-2014, 07:51 AM)alexandr1966 Wrote:  
(23-09-2014, 20:50 PM)audiopoint Wrote:  Connect GND SCL SDA from programer
connect NAVI 3x+ and gnd
turn navi on wait 10 sec until on display CODE or SAFE
read FIS
good luck
Thanks for your answer. I read FIS module as 24c32 - right? Or should read as 24c64?

depence of model of navi usually 24c32
anyway send dump that you read some of "GA experts" will look
hi ihave UPA USB is it the same connection like PONYProgrammer in the pic above,thank you.
Quote this message in a reply
21-02-2016, 12:04 PM,
Post: #8
RE: How to Read FIS Module
U can use any programmer, u just need to know ur pinout in ur programmer .
Quote this message in a reply
21-02-2016, 18:22 PM,
Post: #9
RE: How to Read FIS Module
(21-02-2016, 12:04 PM)Tecdiag Wrote:  U can use any programmer, u just need to know ur pinout in ur programmer .

yes any i2c Programmer

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[+] 12 users say Thank You to volavka for this post
03-04-2016, 20:44 PM,
Post: #10
RE: How to Read FIS Module
Thank you friends for help
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZVW VW DELPHI MU9122D READ-ONLY FILE SYSTEM Jester 8 397 19-03-2024, 06:41 AM
Last Post: mobista
  KenWood DDX5015DAB Read Code or Reset Bult 0 55 28-02-2024, 01:04 AM
Last Post: Bult
KOpel Read 93C66 with CH341A (OPEL GID) MasterMulder 4 189 16-02-2024, 21:01 PM
Last Post: MasterMulder
ZVW Blaupunkt MFD VWZ1Z7 not possible read 24c32 ikrom 0 85 10-02-2024, 12:01 PM
Last Post: ikrom
  mc68hc705b32 from Audi Chorus M4 - UPA USB 1.3 read error patrykv98 7 573 18-11-2023, 15:20 PM
Last Post: Raimaxs
  How to read Spansion S29GL512 BGA urgi 3 652 26-04-2023, 08:10 AM
Last Post: zero9
  BMW CIC emmc read? bmchicago 2 581 10-03-2023, 22:13 PM
Last Post: bmchicago
  Ford KA / Fiat Blue & Me module repair? JNC 0 713 21-10-2022, 17:45 PM
Last Post: JNC
  Ford Radio - PIN read or memory copy Joe2 1 603 16-09-2022, 10:56 AM
Last Post: PeGaSo32a
YTMercedes GLC 2018 steering N80 module pinout 12manux 2 1,085 04-04-2022, 05:32 AM
Last Post: 12manux

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content