Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
IMMOBOX AND ECU IMMOBILISER PINOUTS
05-10-2015, 20:02 PM,
Post: #1
|
|||
|
|||
IMMOBOX AND ECU IMMOBILISER PINOUTS
Hello mates, lets try to share any immo and ecu pinouts you may have. this will help newby like me without good soldering skills.
Here we go, I have figured out this opel immo 1. |
|||
05-10-2015, 20:10 PM,
Post: #2
|
|||
|
|||
RE: IMMOBOX AND ECU IMMOBILISER PINOUTS
Hello mate,
please which programmer did you use? must let us know the programmer and pins number of the mcu thank you. best regards |
|||
05-10-2015, 20:49 PM,
Post: #3
|
|||
|
|||
RE: IMMOBOX AND ECU IMMOBILISER PINOUTS
This is for xprog programer. check pin assignment from xprog manual.
|
|||
05-10-2015, 21:32 PM,
Post: #4
|
|||
|
|||
RE: IMMOBOX AND ECU IMMOBILISER PINOUTS
Hello there you can wire directly to chip to retrieve security code etc on this immo
but you have to solder check here http://cartechnology.co.uk/showthread.php?tid=9180 If mine or others posts and info are helpful please give thanks/rep
|
|||
13-10-2015, 11:38 AM,
Post: #5
|
|||
|
|||
RE: IMMOBOX AND ECU IMMOBILISER PINOUTS
On this type the immobiliser immo1: opel com interface its possible to read eeprom and found pin code and id of transponder is id 33 have a nice day.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content