Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]

ic_204 update firmware?
08-04-2025, 06:05 AM,
Post: #1
ic_204 update firmware?
Has anybody already updated there firmware on colored ic_204 cluster?

Reason why I want to update mine is because I want the newer silver theme instead of my brown sand color screen 

If so how can I do it, I have Vёdїамо
Quote this message in a reply
08-04-2025, 12:36 PM,
Post: #2
RE: ic_204 update firmware?
(08-04-2025, 06:05 AM)Raymondm2007 Wrote:  Has anybody already updated there firmware on colored ic_204 cluster?

Reason why I want to update mine is because I want the newer silver theme instead of my brown sand color screen 

If so how can I do it, I have Vёdїамо
It might be(silver screen)  already there but needs to be астїvатёd.
Did you try the ёиgїиёёяїяg mode? If not here is how to access it and check if it is there.
On your radio press three buttons simultaneously Hang-up, # and 1. keep them pressed until ёиgїиёёяїяg mode screen come out.
Select line #7 HW setting
Select line #7.7 HU parameter
Select line #106 HMI Design
Next screen you should have two lines : PAPYRUS and SILVER. if you see SILVER then select it and go back to page 2 of the ёиgїиёёяїяg mode and select END.
Quote this message in a reply
[+] 1 user says Thank You to joseph alison for this post
08-04-2025, 15:12 PM,
Post: #3
RE: ic_204 update firmware?
(08-04-2025, 12:36 PM)joseph alison Wrote:  
(08-04-2025, 06:05 AM)Raymondm2007 Wrote:  Has anybody already updated there firmware on colored ic_204 cluster?

Reason why I want to update mine is because I want the newer silver theme instead of my brown sand color screen 

If so how can I do it, I have Vёdїамо
It might be(silver screen)  already there but needs to be астїvатёd.
Did you try the ёиgїиёёяїяg mode? If not here is how to access it and check if it is there.
On your radio press three buttons simultaneously Hang-up, # and 1. keep them pressed until ёиgїиёёяїяg mode screen come out.
Select line #7 HW setting
Select line #7.7 HU parameter
Select line #106 HMI Design
Next screen you should have two lines : PAPYRUS and SILVER. if you see SILVER then select it and go back to page 2 of the ёиgїиёёяїяg mode and select END.


I'll check that out
Quote this message in a reply
08-04-2025, 18:31 PM, (This post was last modified: 08-04-2025, 18:31 PM by Raymondm2007.)
Post: #4
RE: ic_204 update firmware?
i just checked and i don't have that option on my HU.
trying to figure out which firmwares I need to download, on SW FINDER

but i did a back up of my ic_204
рдятnumber

Version Supplier Status flashed by
Hardware 2129014102 11/06.00 VDO - - -
SW Block #0 2049021203 11/15.00 VDO valid 255-255-2 Re FFFFFFFF
SW Block #1 2049028302 10/48.00 VDO valid 255-255-2 Re FFFFFFFF
SW Block #2 2129021705 10/48.00 VDO valid 255-255-2 Re FFFFFFFF
SW Block #3 2049028102 10/48.00 VDO valid 255-255-2 Re FFFFFFFF
SW Block #4 2049028502 10/48.00 VDO valid 255-255-2 Re FFFFFFFF

i just checked and i don't have that option on my HU.
trying to figure out which firmwares I need to download, on SW FINDER

but i did a back up of my ic_204
рдятnumber

Version Supplier Status flashed by
Hardware 2129014102 11/06.00 VDO - - -
SW Block #0 2049021203 11/15.00 VDO valid 255-255-2 Re FFFFFFFF
SW Block #1 2049028302 10/48.00 VDO valid 255-255-2 Re FFFFFFFF
SW Block #2 2129021705 10/48.00 VDO valid 255-255-2 Re FFFFFFFF
SW Block #3 2049028102 10/48.00 VDO valid 255-255-2 Re FFFFFFFF
SW Block #4 2049028502 10/48.00 VDO valid 255-255-2 Re FFFFFFFF
Quote this message in a reply
10-04-2025, 13:12 PM,
Post: #5
RE: ic_204 update firmware?
(08-04-2025, 18:31 PM)Raymondm2007 Wrote:  i just checked and i don't have that option on my HU.
trying to figure out which firmwares I need to download, on SW FINDER

but i did a back up of my ic_204
рдятnumber   

                                                Version        Supplier        Status      flashed  by
Hardware 2129014102      11/06.00        VDO            -          -        -         
SW Block #0 2049021203      11/15.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #1 2049028302      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #2 2129021705      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #3 2049028102      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #4 2049028502      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF

i just checked and i don't have that option on my HU.
trying to figure out which firmwares I need to download, on SW FINDER

but i did a back up of my ic_204
рдятnumber   

                                                Version        Supplier        Status      flashed  by
Hardware 2129014102      11/06.00        VDO            -          -        -         
SW Block #0 2049021203      11/15.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #1 2049028302      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #2 2129021705      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #3 2049028102      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #4 2049028502      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
Which variant is installed in  your system?
Quote this message in a reply
10-04-2025, 15:15 PM,
Post: #6
RE: ic_204 update firmware?
(10-04-2025, 13:12 PM)joseph alison Wrote:  
(08-04-2025, 18:31 PM)Raymondm2007 Wrote:  i just checked and i don't have that option on my HU.
trying to figure out which firmwares I need to download, on SW FINDER

but i did a back up of my ic_204
рдятnumber   

                                                Version        Supplier        Status      flashed  by
Hardware 2129014102      11/06.00        VDO            -          -        -         
SW Block #0 2049021203      11/15.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #1 2049028302      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #2 2129021705      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #3 2049028102      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #4 2049028502      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF

i just checked and i don't have that option on my HU.
trying to figure out which firmwares I need to download, on SW FINDER

but i did a back up of my ic_204
рдятnumber   

                                                Version        Supplier        Status      flashed  by
Hardware 2129014102      11/06.00        VDO            -          -        -         
SW Block #0 2049021203      11/15.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #1 2049028302      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #2 2129021705      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #3 2049028102      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
SW Block #4 2049028502      10/48.00        VDO            valid      255-255-2 Re FFFFFFFF
Which variant is installed in  your system?


W212
Quote this message in a reply
11-04-2025, 09:14 AM,
Post: #7
RE: ic_204 update firmware?
[/quote]
Which variant is installed in  your system?
[/quote]

W212
[/quote]
The variant looks like this example: IC218_212_207_204Mid_AeJ12 
It is at the top when you connect IC_204 in Vёdїамо.
Quote this message in a reply
11-04-2025, 20:11 PM,
Post: #8
RE: ic_204 update firmware?
Which variant is installed in  your system?
[/quote]

W212
[/quote]
The variant looks like this example: IC218_212_207_204Mid_AeJ12 
It is at the top when you connect IC_204 in Vёdїамо.
[/quote]




It's 
IC218_212 _207 _204mid _AeJ11
Quote this message in a reply
12-04-2025, 15:29 PM, (This post was last modified: 13-04-2025, 09:13 AM by joseph alison.)
Post: #9
RE: ic_204 update firmware?
(11-04-2025, 20:11 PM)Raymondm2007 Wrote:  
(11-04-2025, 09:14 AM)joseph alison Wrote:  
Which variant is installed in  your system?

W212
[/quote]
The variant looks like this example: IC218_212_207_204Mid_AeJ12 
It is at the top when you connect IC_204 in Vёdїамо.
[/quote]




It's 
IC218_212 _207 _204mid _AeJ11
[/quote]
OK, your IC is mid year 2011.

The CFFs which are installed in your system are version 10/48.00 which means year 2010 week 48.
If you go to SW finder and enter your HW number which is 2129014102, you will get a list of CFFs, you have to select the version which is superior to year 10/48. So you can select all the files which have the same version ex:114001 (11/40.01) or 120800 (12/08.00).

Try the following CFF whiuch are version 12/08.
SW block #0   2049022903.CFF
SW block #1   2049023003.cff
SW block #2   2049023103.cff
SW block #3   2049022803.cff
SW block #4   2049023203.cff

This the way to check if a cff is suitable for your HW number is as follow: search for the CFF number in SW finder, then look at your HW number on the left column. If you see your HW number then the cff is ok for your hardware.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  E207 ic204 update silver menu tommy999 0 79 23-05-2026, 08:28 AM
Last Post: tommy999
  MB VIN Decoder App v3.0.3 (Update) Colion 7 1,050 21-05-2026, 12:54 PM
Last Post: zigzag
  C6 CHINA CLONE FIRMWARE UPDATE JR2 10 903 09-01-2026, 08:33 AM
Last Post: gcs190
  Original жеитяу VCI CAR/TRUCK Firmware Wizen 0 110 21-12-2025, 15:35 PM
Last Post: Wizen
  жеитяу VCI back to car Firmware Wizen 1 94 08-06-2025, 07:46 AM
Last Post: gcs190
  IC_204 Help updating to silver design Bertorigins 0 179 20-04-2025, 18:56 PM
Last Post: Bertorigins
  Solved ✔ Bench test cluster ic_204 help Raymondm2007 1 235 17-04-2025, 13:57 PM
Last Post: Raymondm2007
  IC_204 update to silver menu - which cffs? haxigi 8 1,948 14-04-2025, 08:19 AM
Last Post: joseph alison
  жеитяу cannot read after emissions cheat update CID_Dave 3 352 18-09-2024, 18:26 PM
Last Post: gcs190
  VGS4NAG2 MB Vito W447: smr-f / cff writing fails after incorrect update file used tabadabadam 0 493 10-05-2024, 18:20 PM
Last Post: tabadabadam

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content