Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Clio airbag reprogramming
18-12-2013, 19:05 PM,
Post: #1
|
|||
|
|||
Clio airbag reprogramming
Ok so i have the MOT in about ten days and have the airbag service light on. I cut out the plugs and soldered the wires but it didn't help so tried to bypass with resistors but again had no effect. Clip showing DF183 and DF077 (thorax airbag and seatbelt tensioner) just wondering if anyone knows how to take them off the equipment list with a cloned clip? Thanks
|
|||
18-12-2013, 19:26 PM,
Post: #2
|
|||
|
|||
RE: Clio airbag reprogramming
Yes can configure with clip clone,disconected plugs and configure without thorax airbag and seatbelt tensioner and clear dtc
X-Tool Superprog & Upd.2022 for sale!!PCR2.1 PIN,KM,CS,MAC1,MAC2,ImmoOFF,Iaw59F Dec.Tool,BMW,MB,Renault CAN filter,Immo Off-CRC calc.,BMW Fxx-Exx Alfa 159 Original Keys,Nissan LCN Nav Dec. OMAP mcu,RCD310-510 decode or code off.Calculate JCB v1-v2,VW Comfort CS,PIN,MAC from dump,EGR-DPF-Lambda OFF
|
|||
18-12-2013, 19:40 PM,
Post: #3
|
|||
|
|||
RE: Clio airbag reprogramming
How do i do it!? thanks
|
|||
18-12-2013, 19:55 PM,
Post: #4
|
|||
|
|||
RE: Clio airbag reprogramming
Check airbag module and in this module have reprogramming function,and read configuration and after can configure airbags only off this airbag what no need
X-Tool Superprog & Upd.2022 for sale!!PCR2.1 PIN,KM,CS,MAC1,MAC2,ImmoOFF,Iaw59F Dec.Tool,BMW,MB,Renault CAN filter,Immo Off-CRC calc.,BMW Fxx-Exx Alfa 159 Original Keys,Nissan LCN Nav Dec. OMAP mcu,RCD310-510 decode or code off.Calculate JCB v1-v2,VW Comfort CS,PIN,MAC from dump,EGR-DPF-Lambda OFF
|
|||
19-12-2013, 19:23 PM,
Post: #5
|
|||
|
|||
RE: Clio airbag reprogramming
Sorted that with Clip - took them out but it flagged up another code along with the first two. I cut the two resistors out i'd previously soldered in and the lights disappeared off the dash. Cleared the memory and I'm showing no faults now. I think there must have been a break in some of the wires somewhere other than around or in the plugs. Thanks for the help asto!!
|
|||
15-01-2014, 07:36 AM,
Post: #6
|
|||
|
|||
RE: Clio airbag reprogramming
(18-12-2013, 19:05 PM)Scousebil Wrote: Ok so i have the MOT in about ten days and have the airbag service light on. I cut out the plugs and soldered the wires but it didn't help so tried to bypass with resistors but again had no effect. Clip showing DF183 and DF077 (thorax airbag and seatbelt tensioner) just wondering if anyone knows how to take them off the equipment list with a cloned clip? Thankshi you should soulder the wires 2.5 om resistance regards |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content