[zorion]

Hi,

i want to reset the airbag CONTROLLER

of a suzuki jimny diesel mod 2005

mitsubishi electric 38910-84A10

DPT W2T71781
84A1

Any help ???

[volavka]

Hi,

i want to reset the airbag CONTROLLER

of a suzuki jimny diesel mod 2005

mitsubishi electric 38910-84A10

DPT W2T71781
84A1

read e2prom 93c56 and upload fw here
good luck

[aflou]

Hello
i have this file if it can help

[zorion]

Volavka, i' m sorry but what is e2prom 93c56 ? and how can i read it ?

aflou, i' m trying to see it, i download it but it can' t play to my VLC (maybe i have an older version??) It is starting but no continue ..

Guys, i m sorry that i don t understand you, but i m knew to forums amd i m dom t knoe how works

Help me a little ..

[xander20005]

Hi, do you have any electronic knowledge? 93c56 is eeprom. if you open your module you will find inside. you need a programmer ( upa, xprog,seeprog...)connected to pc to read/write.you remove the eeprom from board and read/verify. post dump (what you read) here, somebody will clear the crash data and after you write back to eeprom. my opinion if you dont know anything about eeproms give your module to somebody who can make for you. of course if you dont want to damage it.
BR

---

vlc is a movie player to open what eep contain you need some hex editor, programmer or total comander

[zorion]

Thank you xander20005 ..
if i must go so deep, i need more knowledge

I just wondered - because i saw on you tube - if there is an easy way, to shut off the red lamp from the panel. I bought the car 2nd hand from another one and it was all ok. no lights no nothing. After few weeks sundelly the red lamp of airbag lights on. No car crash of course, no airbag opened (NOTICE THAT) . completely sundelly ..
I m not sure, but i believe it i is a matter of "noise" or something simmilar.
At Suzuki dealer they put it to their computer and they told me that they can' t read an error and they believe that the car had water inside (there was rust in some places) and maybe this was the problem. But i don' t believe it, because as i had it in my hands there was no light.
Some people in you tube they shut off the warning lights with simple ways. Start - stop sometimes the engine or .... etc
Have any idea before we go to reprogramme the unit ?

( aflou, i don' t know why the video don' t start to play. My VLC openning and ..stays there, like it has nothing to play ..)

[xander20005]

To clear faults you need diagnostic tool, to erase crash data after accident then you need to remove eep. open the unit and see inside if have water damage, then repair or replace (depends of damage)
if you have for ex. fault on airbag (connections) some cars clear fault by itself without diagtool but most cars req. to clear from diagtool. (not believe everything what you see on youtube...so) btw. why you want to reprogram the unit??? if suzuki says no fault code found?! reprogramation you make once when the unit is new.
my opinion, go to suzuki or who have diag tool for that model and simply make a fault erase or remove the battery (watch out for radio code) for few minutes. maybe it will help. (if not have water damage inside)

[zorion]

I try to see with diagnostic tool, but it is not possible to get inside the unit.
The diagmostic tool in Suzuki, can't "see'' the unit. So, it is not possible to erase the fault. The tool can see many other things to the engine, ABS etc, but not the Airbag. Like no exist.
i' m trying to clear the pins but i believe i must open it finally.
i didn' t get in yet, because i believe it is an "outside" reason.
As i told, everything was ok until a ..saturday morning!

[xander20005]

Aha, understand. so no comunication with unit. if you have some knowledge and some electric schematics you can measure if have +12v, ign.12v, gnd.... also remove the unit (must be somewhere under the central panel) and open it (check oxidation inside) also chk unit socket too..search for water damage. if have water inside (or oxide) check harness socket too... maybe you put some pictures here

---

if i not forget tomorrow I check. I have some schematics with Jimny. few days ago I search 2 hours for 4wd schematic

[xander20005]

Here is the schematics for jimny

br