[Jeevs]

Hi,

Any ideas on the solution for my issue? Where I have even re-installed ETKA International and used the Windows 10 32bit hardlock driver. However, it still does not update...

Any help would be much appreciated.

Thanks!

[volkov]

Hello

I have a ETKA 7.4 Plus (International) installed and I want to upgrade to 7.5 version.

I have download ETK75_UPGRADE.EXE file to update, but when I start the update I obtain an error "ETKA - by carfreak.kiss - not found!"

How can I solve this error? Is it neccessary to remove all the installation and do a new installation?

Thanks

[planet-fireball]

Hello

I have a ETKA 7.4 Plus (International) installed and I want to upgrade to 7.5 version.

I have download ETK75_UPGRADE.EXE file to update, but when I start the update I obtain an error "ETKA - by carfreak.kiss - not found!"

How can I solve this error? Is it neccessary to remove all the installation and do a new installation?

Thanks

Yes,
you have to install carfreak.kiss Release 7.4 to do the Upgrade with ETK75_UPGRADE.EXE to ETKA 7.5 !

---

Hi,

Any ideas on the solution for my issue? Where I have even re-installed ETKA International and used the Windows 10 32bit hardlock driver. However, it still does not update...

Any help would be much appreciated.

Thanks!

There is still no working Updater for the 7.4/7.5 carfreak.kiss International Version.
You have to apply the Updates manually.

You can take the Updates from THIS post.

[waiapasi2006]

Thank you for the password. OP

I downloaded the file and extracted it.
Now, to go through the install I get the same options as in post #7
Choose option?
I want to do a clean install of the 7.4 then upgrade to 7.5 as that is the only way to get the update.

Any help with this please?

Also per your instructions;
Upgrade to Version 7.5 failed because updating the following files msvcp100.dll and/or msvcr100.dll. What to do ?
Simply rename these two files in the target folder on your hard drive and try it again

What do you rename these files to?

[JohanP]

I have give reputation and pm you sir but still have not get the password.
Sorry if I seem a little impatient
Can you pls send me the password ?

[planet-fireball]

Thank you for the password. OP

I downloaded the file and extracted it.
Now, to go through the install I get the same options as in post #7
Choose option?
I want to do a clean install of the 7.4 then upgrade to 7.5 as that is the only way to get the update.

Any help with this please?

Also per your instructions;
Upgrade to Version 7.5 failed because updating the following files msvcp100.dll and/or msvcr100.dll. What to do ?
Simply rename these two files in the target folder on your hard drive and try it again

What do you rename these files to?

Hi,
it's quite simple, search the two files in the ETKA folder (via Windows Explorer),
be sure that ETKA 7.4 or Upgrade Installation is not running and rename it
to e.g. msvcp100_old.dll. -> Than you can start ETKA 7.5 Setup.

---

I have give reputation and pm you sir but still have not get the password.
Sorry if I seem a little impatient
Can you pls send me the password ?

Hi, i already sent you the password yesterday.

[waiapasi2006]

Thank you for the password. OP

I downloaded the file and extracted it.
Now, to go through the install I get the same options as in post #7
Choose option?
I want to do a clean install of the 7.4 then upgrade to 7.5 as that is the only way to get the update.

Any help with this please?

Also per your instructions;
Upgrade to Version 7.5 failed because updating the following files msvcp100.dll and/or msvcr100.dll. What to do ?
Simply rename these two files in the target folder on your hard drive and try it again

What do you rename these files to?

Hi,
it's quite simple, search the two files in the ETKA folder (via Windows Explorer),
be sure that ETKA 7.4 or Upgrade Installation is not running and rename it
to e.g. msvcp100_old.dll. -> Than you can start ETKA 7.5 Setup.

---

I have give reputation and pm you sir but still have not get the password.
Sorry if I seem a little impatient
Can you pls send me the password ?

Hi, i already sent you the password yesterday.

---

Thank you, I will try that.
Now, I still get the options to choose a file:
Option 1
Option 2

How do I get etka7.4 installed?

[planet-fireball]

Thank you for the password. OP

I downloaded the file and extracted it.
Now, to go through the install I get the same options as in post #7
Choose option?
I want to do a clean install of the 7.4 then upgrade to 7.5 as that is the only way to get the update.

Any help with this please?

Also per your instructions;
Upgrade to Version 7.5 failed because updating the following files msvcp100.dll and/or msvcr100.dll. What to do ?
Simply rename these two files in the target folder on your hard drive and try it again

What do you rename these files to?

Hi,
it's quite simple, search the two files in the ETKA folder (via Windows Explorer),
be sure that ETKA 7.4 or Upgrade Installation is not running and rename it
to e.g. msvcp100_old.dll. -> Than you can start ETKA 7.5 Setup.

---

I have give reputation and pm you sir but still have not get the password.
Sorry if I seem a little impatient
Can you pls send me the password ?

Hi, i already sent you the password yesterday.

---

Thank you, I will try that.
Now, I still get the options to choose a file:
Option 1
Option 2

How do I get etka7.4 installed?

Please read my previous posts carefully, before you ask !
Here is the answer to your question: >>> LINK <<<

[waiapasi2006]

Thank you for the password. OP

I downloaded the file and extracted it.
Now, to go through the install I get the same options as in post #7
Choose option?
I want to do a clean install of the 7.4 then upgrade to 7.5 as that is the only way to get the update.

Any help with this please?

Also per your instructions;
Upgrade to Version 7.5 failed because updating the following files msvcp100.dll and/or msvcr100.dll. What to do ?
Simply rename these two files in the target folder on your hard drive and try it again

What do you rename these files to?

Hi,
it's quite simple, search the two files in the ETKA folder (via Windows Explorer),
be sure that ETKA 7.4 or Upgrade Installation is not running and rename it
to e.g. msvcp100_old.dll. -> Than you can start ETKA 7.5 Setup.

---

I have give reputation and pm you sir but still have not get the password.
Sorry if I seem a little impatient
Can you pls send me the password ?

Hi, i already sent you the password yesterday.

---

Thank you, I will try that.
Now, I still get the options to choose a file:
Option 1
Option 2

How do I get etka7.4 installed?

Please read my previous posts carefully, before you ask !
Here is the answer to your question: >>> LINK <<<

I read that post.
Here is the problem I am getting. I deleted everything I extracted. Started from beginning. From the first 10 parts of zip files I extracted, I have tried to install that application within. (ETKA_V2015)
Once the application starts, I get what the member in post "7" has posted.

As for the questions I had asked you prior, I needed to install your version of ETKA 7.4 before I upgrade to 7.5

However, I still can't get pass those options listed. Do you have just the 7.4 files somewhere else I can use to install 7.4 first?
Below you will see the application I tried first.

[JohanP]

Just finish installing ETKA_Full_74_Germany and all ok.
The I started installing "ETK75_UPGRADE.EXE" and the I got an error:
Se picture:
   

Version 7.4 international. Win7, 32 bits

Windows Task Manager:
   


Any suggestions`?