[hafido1983]

Hi guys
i need help about faults code bmw serie 3 2012
EPS
4823CB :EPS: no current coding data stored
4823CC: PSC:CONTROL unit is not encoded for the vehicule
because i changed EPS and the car is crashed and i put a used EPS
how can program it ...?
thanks

[hafido1983]

Any help please

---

no one had same faults...?

[Patrick11021979]

You will have to programm it with Ista-p or Esys....

[Vitosis]

HI, man! I need help. I were replace EPS control modul from f25 to f34. Now i have fault no current coding data stored. I try code EPS by ESYS, but there no CAFD file. I try restore it from SWE, but no result. ISTA+ says replace EPS. Can you help me?

[emhtuning]

HI, man! I need help. I were replace EPS control modul from f25 to f34. Now i have fault no current coding data stored. I try code EPS by ESYS, but there no CAFD file. I try restore it from SWE, but no result. ISTA+ says replace EPS. Can you help me?

according to ETK , F34 and F25 don't share the same EPS , so I don't know if you only replaced the motor which has EPS module attached to it or you replaced the whole steering rack but I doubt it will work .

F25 uses different bus system structure than F3x , you will not be able to code it or flash it or even have it working IMO.