Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
17-02-2016, 21:17 PM,
Post: #121
RE: BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
(17-02-2016, 21:09 PM)JoeHallenbeck Wrote:  
(17-02-2016, 20:43 PM)beemerboy88 Wrote:  
(17-02-2016, 20:16 PM)JoeHallenbeck Wrote:  Hi everybody. i installed rheingold 3.53.13 step by step as it is described in the manual.
it works so far but the version of "data" (found under "administration" - "version" - "subsystem") shows only "R--".
can anybody help me?

run the reg fix

thanks beemerboy88. unfortunately the fix wasn't included in the package I downloaded. do you have a link for me?

Edit the one from 3.53.30 or update.
Quote this message in a reply
[+] 2 users say Thank You to beemerboy88 for this post
17-02-2016, 21:28 PM,
Post: #122
XZBMW  RE: BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
(17-02-2016, 21:17 PM)beemerboy88 Wrote:  
(17-02-2016, 21:09 PM)JoeHallenbeck Wrote:  
(17-02-2016, 20:43 PM)beemerboy88 Wrote:  
(17-02-2016, 20:16 PM)JoeHallenbeck Wrote:  Hi everybody. i installed rheingold 3.53.13 step by step as it is described in the manual.
it works so far but the version of "data" (found under "administration" - "version" - "subsystem") shows only "R--".
can anybody help me?

run the reg fix

thanks beemerboy88. unfortunately the fix wasn't included in the package I downloaded. do you have a link for me?

Edit the one from 3.53.30 or update.

ok, I have edited the reg fix. Works perfectly now! thank you very much my friend. yes
Quote this message in a reply
23-02-2016, 15:43 PM,
Post: #123
RE: BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
I am new to this..Tested INPA is installed properly...Is this error normal? or I need to put the database file somewhere?

PS, just for diagnostic, no programming reuqired for me


Attached Files Thumbnail(s)
   
Quote this message in a reply
[+] 2 users say Thank You to jasonwch for this post
28-02-2016, 21:30 PM,
Post: #124
BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
Operations report is blank, used to work before. Is there a setting to enable it ?
Quote this message in a reply
28-02-2016, 23:21 PM,
Post: #125
RE: BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
(23-02-2016, 15:43 PM)jasonwch Wrote:  I am new to this..Tested INPA is installed properly...Is this error normal? or I need to put the database file somewhere?

PS, just for diagnostic, no programming reuqired for me

Once you download the sqldb you have to unblock the files in order to avoid this warning.

http://winaero.com/blog/how-to-unblock-f...indows-10/
Quote this message in a reply
29-02-2016, 23:15 PM,
Post: #126
XZBMW  RE: BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
(23-02-2016, 15:43 PM)jasonwch Wrote:  I am new to this..Tested INPA is installed properly...Is this error normal? or I need to put the database file somewhere?

PS, just for diagnostic, no programming reuqired for me

I have same error to you , You have found solution ?

Thanks
Quote this message in a reply
16-08-2016, 07:27 AM,
Post: #127
RE: BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
I have this error. If I push OK, ISTA close and if I push x all is ok.


Attached Files Thumbnail(s)
   
Quote this message in a reply
16-08-2016, 23:13 PM,
Post: #128
XZBMW  RE: BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
(16-08-2016, 07:27 AM)ionut.ciuca Wrote:  I have this error. If I push OK, ISTA close and if I push x all is ok.

That is usually a inadequate hardware error. If you check logs, you can learn more. Choice is to use standalone version with hardware check removed or continue to click X and use software.


Quote this message in a reply
[+] 4 users say Thank You to Almaretto for this post
29-08-2016, 02:33 AM,
Post: #129
RE: BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
Thank you , i will try it
Quote this message in a reply
30-03-2018, 03:49 AM,
Post: #130
RE: BMW ISTA-D 3.53.13 Standalone (Base Installation without bases)
(29-12-2015, 19:40 PM)Skid1164 Wrote:  For all with the following error "Failed to start ISTA. Please make sure your ISTA configuration is valid." and normal installation 3.53.13 (non standalone version):

Change both PUK lines in the file ISTAGUI.exe.config to false:

<add key="BMW.Rheingold.CoreFramework.PUKActive" value="false"/>
<add key="BMW.Rheingold.CoreFramework.PUKLoadSaveActive" value="false"/>


And install Microsoft Visual C++ 2013 Redistributable X86 and X86,
Windows 10 users have to install the Microsoft .NET Framework 4.6.



Hit Thanks and Reputation button if this post helped you.
How can I open ISTAGUI.exe.config and how to change?sweating


*problem solved thank you
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW ISTA Standalone Licenserequest up to v4.37.4x Sedoy 8,653 628,007 10 minutes ago
Last Post: r0my81
  ista 4.46 Standalone kiranabc 33 3,132 Yesterday, 19:51 PM
Last Post: Siki78
  ista for use whit vcx se db8000 0 46 Yesterday, 15:28 PM
Last Post: db8000
  AOS Ista possible to deactivate second check after scan? RaoulK1998 17 371 Yesterday, 10:39 AM
Last Post: RaoulK1998
XZBMW ISTA 4.46.xx problems and possible solution Sedoy 76 7,409 27-03-2024, 20:02 PM
Last Post: Node
XZBMW Update ISTA at once 4.43.40 (ISTA Update Program) charlesjyw 34 6,494 27-03-2024, 10:39 AM
Last Post: MINIGP1610
XZBMW BMW ISTA-P Rheingold 69.0.200 (Torrent File) carsoftcare 1 135 26-03-2024, 12:09 PM
Last Post: hlip
  ISTA launcher problem Red_bean_bun 1 168 26-03-2024, 05:11 AM
Last Post: 2013m5
XZBMW Adding a new vehicle/model to "Reingold" ISTA+ dieselweasel 12 671 25-03-2024, 08:11 AM
Last Post: Node
XZBMW Ultimate Ediabas/ISTA+ voltage control V3 Node 322 121,537 24-03-2024, 23:45 PM
Last Post: armenh7

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content