[handycommander]

Hi,

I know that I can read with VCDS the mileage if I had EDC15 or EDC16.
But I want to know the real mileage from an Audi A4 3.0 TDI 2010.

Is there any way to get the real mileage thru VCDS or VAG K+CAN Commander?
Is the mileage stored in any other ecu like DSG or gateway?

Thanks

[Carpediem]

Yes it is also stored in the transmission, look at 02 module

[handycommander]

In 02 - transmission module I cant find any value that gives the real mileage.
Is there any other way?

I tried to remove the fuse from odometer and removed air mass meter so that this gives a fault message in engine. But the mileage then is from odometer as I put back the fuse and try to read the fault codes

[handycommander]

Nobody an idea?

[skywoker]

With vcds in eeprom ecu i manage to read km from installed dpf.

[handycommander]

With vcds in eeprom ecu i manage to read km from installed dpf.

Ok, how?
I can't find this value... Can you tell me how to get this?

[skywoker]

Advanced measuring, read all values from DPF. One of this value is km from installed dpf.

[handycommander]

Advanced measuring, read all values from DPF. One of this value is km from installed dpf.

Hmm, I tried this. But I could remember, the only value I could read was the km value from last regeneration.
Do you know the exact value?

[skywoker]

I'm on the phone right now, in two minutes i go in my car and make pics from vcds, ok??

[handycommander]

I'm on the phone right now, in two minutes i go in my car and make pics from vcds, ok??

Okay, thats cool! thank you!