Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
27-11-2015, 00:00 AM,
Post: #1
MChevrolet  06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
Have a 06 lucerne. It has a hc9s12h128vfv processor on board
!noone know connection points on board power ground bkgd reset and such. I'm lost on this one
Quote this message in a reply
27-11-2015, 00:27 AM, (This post was last modified: 27-11-2015, 01:04 AM by Clusters.)
Post: #2
RE: 06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
Picture of the rear of the board might help. Has it got 6 pads on the back for BDM connections?

When and if you do read the processor and you can't transfer the file to your computer you can enter the info into a hex editor manually then upload the file here and someone can help you with the calculation.

Last time I tried to explain this to you, you couldn't grasp it so here is a pic that might help you understand. Yes it's a bit of work, but you will have the file on your computer and be able to upload it.

Also info on reading 9S12 processors on a lot of different dashes when you don't have instructions. All you have to do is identify which pad is ground and the rest are easy to figure out.


Attached Files Thumbnail(s)
       

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Reputation: +1 - DMV360 [+1]
Quote this message in a reply
[+] 2 users say Thank You to Clusters for this post
04-12-2015, 20:43 PM,
Post: #3
RE: 06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
Ok so I did had have 6 point connection spot. When connected I get it to read as 9s12 4k. In digi but I get all ff. For display what am I dowing wrong
Can digi clone just not read it
Quote this message in a reply
04-12-2015, 20:59 PM,
Post: #4
RE: 06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
No idea what you're doing wrong, I have read plenty of 9S12 processors on GM clusters with digi with no problem.

Verify correct orientation of pads and wiring on ST 48:

7 white
13 brown
17 green
18 yellow

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Quote this message in a reply
05-12-2015, 03:24 AM,
Post: #5
RE: 06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
Ya I got it to work thanks I used st48 it calcs out like a Buick allure. Xmodder on hereach helped me out. Thanks ks thou
Quote this message in a reply
05-12-2015, 03:39 AM,
Post: #6
RE: 06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
So how about post a pic of the connections on the board to share with others in the future, and maybe a click on the thanks button?

think

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Quote this message in a reply
[+] 2 users say Thank You to Clusters for this post
07-12-2015, 01:48 AM,
Post: #7
RE: 06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
Well your as always corky attitude was not very helpful as always. So thanks for telling me I was doing something wrong and being a dickhead about it. I did give credit to xmodder who helped me. I will be posting the pictures here when I figure out what format I have so them in I can't upload from my phone
Reputation: -1 - Clusters [-1]
Quote this message in a reply
07-12-2015, 03:53 AM,
Post: #8
RE: 06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
I was trying to be helpful, and not a dickhead in the least.

Next time you can figure it out for yourself with an attitude like that.

If someone took the time to help you, the least you can do is take a few seconds and press two buttons! 

Thanks [Image: tyl_add.png] + [Image: postbit_reputation.gif] reputation.
Quote this message in a reply
[+] 2 users say Thank You to Clusters for this post
07-12-2015, 07:12 AM,
Post: #9
RE: 06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
I understand your a old schooler an new people annoy your when you're make brain.exercise hex converter comments
That's being a dick. I know how to use a hex converter I hand Calc half the stuff I do. Your arrogant regardless. I will I usually do. And I don't have a bad attitude. I've never had a problem with a single other person on this board and it's not the first time u usually have something smart ass to say to go along with your advice which is sometimes helpful. If you're don't want to help its not a problem. I didn't post Buick lucerne clusters need your help. If you're were going to be rude there was no need for your to even comment
Quote this message in a reply
10-12-2015, 20:27 PM,
Post: #10
RE: 06 Buick lucerne 9s12h128vfv. Any ideas for connection points on board anyone?
Here is a picture and instruction for buick lucerne by handcalc with iprog
dont as buick allure with 9s12
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  bmw e39 xprog connection BobbySD 9 1,425 03-06-2022, 22:39 PM
Last Post: BobbySD
  Virtual Cockpit MMX serial connection ALeXXBody 8 2,066 06-04-2022, 18:08 PM
Last Post: Clusters
JFiat PUNTO BOARD COMPUTER (bcm) schumi999octavia 0 457 15-06-2019, 02:22 AM
Last Post: schumi999octavia
  need connection diagram freescale mc9s12hy48 solved gohard20 3 840 17-04-2019, 13:02 PM
Last Post: gohard20
  GSXR-1000 2002year - points krepsior 0 630 11-02-2019, 12:14 PM
Last Post: krepsior
  MB91F467BA UPA-S connection diagram tokatli64 0 521 18-12-2018, 13:28 PM
Last Post: tokatli64
  Carprog d1 with a9 test fails any ideas for fix ? dil6222 7 6,095 18-06-2018, 19:22 PM
Last Post: dil6222
XZBMW R270 programmer connection to 160D0WQ oem111 25 12,334 11-03-2018, 14:50 PM
Last Post: Tombo
ZVW Carprog connection problem mitsakos5800 7 4,436 03-02-2018, 11:21 AM
Last Post: spanaz1
  Points Honda Civic 2012 UKNSI pawel7924 2 1,258 31-10-2017, 12:21 PM
Last Post: pawel7924

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content