[Dash_Burner]

After trying correct milleage in Bsi of a citroen C2 1.4HDI i destroyed chip. I dont know how but chip is not readable or writable. I only see 000000 and i can not write anythink in. Chip is 95160. Bsi is siemens ecu is siemens SID 806 .
I already have new chip but i dont have dump.
Car is : Citroen C2 1.4 HDI manual 2004 model
VIN of the car is : VF7JM8HXB97127379
thats the only think i know.

So i need working dump for 95160 chip with about 80000 km.
If i write this new dump will the car start ??
Any help acceptable

regards Bitsaxis

[xander20005]

No. car will not start with that dump. You will need virgin dump and recode everything with diagbox, teach keys.....
with virgin dump you will have 0km in bsi so if you modify dashboard with 80k that will modify bsi too

[Dash_Burner]

No. car will not start with that dump. You will need virgin dump and recode everything with diagbox, teach keys.....
with virgin dump you will have 0km in bsi so if you modify dashboard with 80k that will modify bsi too.

Well I finally put virgin dump in BSI and find code from ECU. I recoded all units and all looked to work fine. BUT

after removing power battery car looses all settings and does not start again. If i make key learning and units recoding all becomes back to normal.

Milleage in dash is 000000000 but dump 93C46 has about 85000 km in it.
I post both bin files from ecu and dash. Also i put vin and code in text file and bsi virgin dump.

Regards Mpitsaxis

[xander20005]

Hmmm. strange. what temp u use to solder eeproms??

---

change battery in bsi. like in bios (just a joke)