[ROD-BENDERS]

Hi Buzzard

Could you please turn the following error codes off - file attached:

17552 (P1144) - MAF
17553 (P1145) - MAF

Thanks in advance.

I did not know you needed a 100% original. Could you the try on the two original files attached? Thanks.

---

Hi Buzzard

Could you please turn the following error codes off - file attached:

17552 (P1144) - MAF
17553 (P1145) - MAF

Thanks in advance.

I did not know you needed a 100% original. Could you the try on the two original files attached? Thanks.

Here is the second file.....

Hi mate, software dpf or egr or dtc removal tools like mine need a good quality read of an ecu to work properly. For example if a file is so messed with the software cannot recognise the "fingerprint" of the file structures so it wont work correctly. Saying that a lot of manual tuners will also say "i cant work with that" because a file has too many alterations it makes the job much harder for them to do especially if its for free.

Now another thing is you havent posted up what ecu it is, for example EDC15P+ or EDC15V+ which means I have to spend time trying different tools looking for the file type, it again makes it harder for me to help you ok.

Ok I have tried various tools on those two files and none of them can find those two DTC codes, so this leads me to believe this ecu type is not supported by any of my softwares, which is a shame as I wanted to help you ok.

Options are fix the car, check that the maf has a good earth connection and or replace it. Or ask a manual tuner to see if they can find DTC table ok.

Regards

Buzz

---

Hi everybody
plz egr off
edc16c34
0281 012 619
BOSCH PARTNER

I cannot open your file mate