[dil6222]

I not changed,I bought with the new firmware.

Only a question what version of software do you have with your carprog and the version of your lib. file? For me,it is the 7.28 with bin.file 081105CAR001773I

Hello, you will find the photos of my clone carprog 7.28. You will see that i have not make any modifications on the pcb (only the white wire for ground). When i compare your carprog with my carprog, i notice that you have make some modifications (removal capacitors, add of a resistor and may be change the value of resitor). Did you have change the value of the resistor R38? Could you please explain me your modifications? Did you have only remove the capacitors C33 and C36? i find a note where someone add a wire to connect C21 and C17
Thanks

.i'm so sorry but , I do not remember how I did it,i only did what I found here on the forum.( sorry i no speak amerikano,i use translater)

Hello, yesterday i have made these modifications but it doesn't work :
- removal of 2 capacitors
- change the value of the resistor
- add a resistor like the photo

Do you know what i can do more. Thank you

Have you updated to 7.81 firmware ?

[spanaz1]

I would like to restore old key to BMW ews 2 with mask 2D47j using carprog, but I once lost data while reading this MCU using carprog, I would like to ask if there is a way to read it with carprog to avoid data loss or is there any other way to restore old keys on BMW E38!?

[spanaz1]

I would like to restore old key to BMW ews 2 with mask 2D47j using carprog, but I once lost data while reading this MCU using carprog, I would like to ask if there is a way to read it with carprog to avoid data loss or is there any other way to restore old keys on BMW E38!?

bump!!

[Stefano G]

Hello,

I'm sorry for the trivial question but I'm new!

Is it possible to read an eeprom 95256 sur a BSI Peugeot by the OBD II port with a Carprog?

Thanks

[keyzex]

Hello,

I'm sorry for the trivial question but I'm new!

Is it possible to read an eeprom 95256 sur a BSI Peugeot by the OBD II port with a Carprog?

Thanks

Now I do not know what Peugeot you have but the answer is up to 99%, it's not possible.
Read here that may help youNow I do not know what Peugeot you have but the answer is up to 99%, it's not possible.
Read here that may help you
https://cartechnology.co.uk/showthread.php?tid=9002

[Stefano G]

I have a Peugeot 208 with Valeo N03 BSI.

There is a cable PSA OBDII to DB9 but how to connect DB9 to Carprog?

[keyzex]

I have a Peugeot 208 with Valeo N03 BSI.

There is a cable PSA OBDII to DB9 but how to connect DB9 to Carprog?

If you were able to connect that to Carprog, what choice do you intend to do in Carprog ?
I do not want to be mean, but for me, that combination seems impossible. That cable is probably made for Lexia
Please let us know if you succeed..
   

[Stefano G]

If you were able to connect that to Carprog, what choice do you intend to do in Carprog ?
I do not want to be mean, but for me, that combination seems impossible. That cable is probably made for Lexia
Please let us know if you succeed..

No, I'm not able to connect that to Carprog, I have not that cable but I see that exists, but it probably made for Lexia, as you say

[There4me]

Hi good day I have recently bought my first carprog and the problem I have is that I got a 2012 honda fit dashboard change the mileage and it doesn't show me how to connect the adaptor but shows which adapters can work like what i have on my digimaster 3 it shows a diagram how to connect on which adaptor normally these honda fit is 93c76 so if anyone as an idea or has a diagram to how to connect it or other units in the near future can share thank you

[invatorice]

Hello
I require activation of my carprog 8.21
My hwid is:
D92C6-D0876-4B006-A9581