Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

CarProg All Questions/Answers Here!
11-05-2018, 20:56 PM,
Post: #771
RE: CarProg All Questions/Answers Here!
(11-05-2018, 17:03 PM)javi225 Wrote:  problem with Chinese carprog, it never worked, supposedly it was version 7.81, is there any way to repair it and upload it from version ??

Hello javi you have to reflash atmel mcu at91sam7s256 with firmware using jtag jlink or jtag wiggler. smile

under If mine or others posts and info are helpful please give thanks/rep smile yes
Quote this message in a reply
12-05-2018, 15:22 PM, (This post was last modified: 12-05-2018, 16:06 PM by javi225.)
Post: #772
CarProg All Questions/Answers Here!
(11-05-2018, 20:56 PM)dil6222 Wrote:  
(11-05-2018, 17:03 PM)javi225 Wrote:  problem with Chinese carprog, it never worked, supposedly it was version 7.81, is there any way to repair it and upload it from version ??

Hello javi you have to reflash atmel mcu at91sam7s256 with firmware using jtag jlink or jtag wiggler. [SMILING FACE WITH OPEN MOUTH]

do you have the software or firmware to update ?? , something else ??, I do not know much about this ... can you explain it better ?? Thank you



Enviado desde mi iPhone utilizando Tapatalk
Quote this message in a reply
12-05-2018, 17:17 PM,
Post: #773
RE: CarProg All Questions/Answers Here!
(12-05-2018, 15:22 PM)javi225 Wrote:  do you have the software or firmware to update ?? , something else ??, I do not know much about this ... can you explain it better ?? Thank you



Enviado desde mi iPhone utilizando Tapatalk

Look some pages back you will find some free dumps in this thread
Also you will find manuals to flash your device in forum
Quote this message in a reply
[+] 2 users say Thank You to 23Andi23 for this post
12-05-2018, 17:29 PM,
Post: #774
RE: CarProg All Questions/Answers Here!
i have Problem with Carprog and Kline Opel ME 1.5.5 ECU Error Not response from ECU..Can no Problem and All Test OK
Quote this message in a reply
13-05-2018, 09:08 AM,
Post: #775
RE: CarProg All Questions/Answers Here!
(12-05-2018, 17:17 PM)23Andi23 Wrote:  
(12-05-2018, 15:22 PM)javi225 Wrote:  do you have the software or firmware to update ?? , something else ??, I do not know much about this ... can you explain it better ?? Thank you



Enviado desde mi iPhone utilizando Tapatalk

Look some pages back you will find some free dumps in this thread
Also you will find manuals to flash your device in forum

thanks, I'll search.
Quote this message in a reply
21-05-2018, 07:08 AM,
Post: #776
RE: CarProg All Questions/Answers Here!
Hello, I have a carprog 7.28 can not read the eeprom 93c56 or 24c04 where can the problem be?
Quote this message in a reply
21-05-2018, 07:11 AM, (This post was last modified: 21-05-2018, 07:12 AM by mikroel.)
Post: #777
RE: CarProg All Questions/Answers Here!
(21-05-2018, 07:08 AM)m1t1k1 Wrote:  Hello, I have a carprog 7.28 can not read the eeprom 93c56 or 24c04 where can the problem be?

Usually non of Chinese clones can't read that eeproms,
your Carprog main unit need to be reworked.
You can find here many threads about similar problems with Carprog
Quote this message in a reply
[+] 2 users say Thank You to mikroel for this post
13-06-2018, 08:19 AM,
Post: #778
RE: CarProg All Questions/Answers Here!
Hello,

I read a lot about rework of Carprog. I am waiting for parts at this point and want to ask you did I get all for doing rework myself. Please look photos.
I am not sure because I am not pro, and there are several PCB version. My CARPROG is 8.21.


Attached Files Thumbnail(s)
           
Quote this message in a reply
[+] 2 users say Thank You to Breket for this post
20-06-2018, 05:06 AM,
Post: #779
RE: CarProg All Questions/Answers Here!
anyone?
hi
Soon I will have all parts and rework unit.
Quote this message in a reply
20-06-2018, 11:16 AM, (This post was last modified: 20-06-2018, 11:23 AM by 23Andi23.)
Post: #780
RE: CarProg All Questions/Answers Here!
(20-06-2018, 05:06 AM)Breket Wrote:  anyone?
hi
Soon I will have all parts and rework unit.

It´s different on each pcb but on your pics are all shown to make a good reworked device. If you not want to flash your device with new FW you not need to lift pin on atmega and mount wire. that´s only to reset the mcu before flashing and to make it easier on next reset because sometimes counter starts on some firmwares and pin maybe break if you lift pin more than 1 time.
For antenna you must check if it work with this values (6-7nF) best is to check The antenna's inductance and calculate capacitor value because chinese sell different antennas with different inductance and 6-7nF not always work
Quote this message in a reply
[+] 4 users say Thank You to 23Andi23 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
0Scope CARPROG 13.77 FREE + REWORK fantomel 53 31,790 21-03-2024, 18:09 PM
Last Post: dani3lxxl
  CarProg V10.05 Lib 020117CAR0000021 mpautoservis 20 17,950 09-08-2022, 11:45 AM
Last Post: km666
  Carprog need activation junnnior 78 24,703 22-01-2022, 19:28 PM
Last Post: canisha
YTMercedes W211 mileage correction with carprog clone. Version 10.93 RUBBER_UNDIES 8 3,906 05-02-2019, 16:17 PM
Last Post: kryspl
YTMercedes w211 assyst carprog mitsakos5800 0 1,038 22-01-2019, 21:02 PM
Last Post: mitsakos5800
ZVW 24C64 - CarProg DaBotta 6 2,836 28-09-2018, 22:07 PM
Last Post: DaBotta
  MB Service Diag V0.2 in Carprog darkmal 0 1,179 13-08-2018, 19:37 PM
Last Post: darkmal
  Carprog d1 with a9 test fails any ideas for fix ? dil6222 7 6,095 18-06-2018, 19:22 PM
Last Post: dil6222
  Carprog A9 test problem. witux 4 2,509 10-03-2018, 18:58 PM
Last Post: rs@chip
ZVW Carprog connection problem mitsakos5800 7 4,437 03-02-2018, 11:21 AM
Last Post: spanaz1

Forum Jump:


Users browsing this thread:
9 Guest(s)

Return to TopReturn to Content