[Automan]

Hi All,

Need some help on this one. I've had to work on a Ford Galaxy 2013 which was perfectly fine until it got hit on the front corner, passenger/ near side (UK).

Problem now is it will turn but won't fire up. All fuses and relays are fine and I can't seem to locate a cut off switch.

fault codes are p0204, p0203, p0202 and p0201, injector open circuit. Except there is not a visible open circuit and continuity throughout the wiring. Just by the off chance it did start once but thats it, never again.

No airbags deployed so no crash data or faults registered in the ecu.

I am using Wurth to help with diagnostic but have bosch esi and launch if need be. I have checked all available modules and found crash registered in bcm. Cleared this and reset the crash through programming options which is fine but still no joy in starting and reaccuring fault codes as listed above.

Any suggestions please...

Thanking you in advance.

[Automan]

Found the fault. Thank you all the same.