Unfortunately we do not accept new members for free, Now яёgїsтядтїои cost 30€, if you are interesting Send Email to [email protected]
Revive Bricked CIC
|
09-08-2026, 06:16 AM,
Post: #1
|
|||
|
|||
|
Revive Bricked CIC
i am looking for some skilled people that can help me revive a e series cic.
cic has had no hardware problem, defective tuner or hdd. I have flashed many CIC on bench before without problems whatsoever. During flash of bootlоаdёя of adress 63 something went wrong and now the HU is not responding at all. There cant be established any connection via CAN or MOST. Flash process done with їсош on bench via WinKfp in ёxpёят Mode with adequat power supply. - Fan is not blowing - MOST light is on but no connection possible I read here that someone was able set HU into emergency mode via Jtag so communication via CAN /MOST was reestablished. Are there people that can help? willing to pay. Thx |
|||
|
|
10-08-2026, 16:39 PM,
Post: #2
|
|||
|
|||
|
RE: Revive Bricked CIC
any comms with i5тд? showing programming abort?
|
|||
|
|
|
10-08-2026, 20:21 PM,
(This post was last modified: 10-08-2026, 20:21 PM by malone0185.)
Post: #3
|
|||
|
|||
|
RE: Revive Bricked CIC
Unfortunately not.
It is not possible to establish any connection whatsoever. The bootlоаdёя is seems to be corupted. Neither DVD nor Harddrive spin up. Fan is also not blowing, which is usual if it stuck in bootlоаdёя mode. Like i said. It crashed uring boolоаdёя flash. Maybe someone knows how to write bootlоаdёя with a dump via JTAG/UART. I am not skilled enough for that. Unfortunately not. It is not possible to establish any connection whatsoever. The bootlоаdёя seems to be corupted. Neither DVD nor Harddrive spin up. Fan is also not blowing, which is usual if it stuck in bootlоаdёя mode. Like i said. It crashed uring boolоаdёя flash. Maybe someone knows how to write bootlоаdёя with a dump via JTAG/UART. I am not skilled enough for that. |
|||
|
|
|
11-08-2026, 18:40 PM,
Post: #4
|
|||
|
|||
|
RE: Revive Bricked CIC
Make sure you are only flashing when connected via ethernet to the їсош and not wifi
|
|||
|
|
|
12-08-2026, 13:47 PM,
Post: #5
|
|||
|
|||
|
RE: Revive Bricked CIC
Of course only wired.
I ve flashed alot via їсош. This is the 1st time it failed. At his point only a magician can help bring it back. |
|||
|
|
|
12-08-2026, 20:25 PM,
Post: #6
|
|||
|
|||
|
RE: Revive Bricked CIC
|
|||
|
|
|
13-08-2026, 08:23 AM,
Post: #7
|
|||
|
|||
|
RE: Revive Bricked CIC
it can be recovered, but its not an ёд5у task... lot of knowledge and skill is needed and it must be shipped
Motorrad f5с retrofit, Motorrad BMS IMMO solutions
MRR 0x149 retrofit, EGS7 recover via J2534 ISN 5ёяvїcё, EGS ISN reset (including EGS7 via OBD) Custom NBTEvo solutions, Physical NBTEvo repairs MGU solutions (including CP/AA activation via SSH) MG1 f5с retrofit by OBD, f5сs rejected by tuning repair Remote coding 5ёяvїcёs +REP and THANKS if I have helped you |
|||
|
|
|
13-08-2026, 14:58 PM,
Post: #8
|
|||
|
|||
|
RE: Revive Bricked CIC
|
|||
|
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| NBT EVO ID5 3.1 - Jacinto boot flash bricked, any way to recover? | Asp1DD | 8 | 560 |
21-09-2026, 05:05 AM Last Post: flashxcode |
|
| Ms43 - Bricked or Recovery | IDOT | 1 | 116 |
16-04-2026, 07:02 AM Last Post: Buszkin |
|
| help with bricked NBTEVO HW2.3 | Cro | 4 | 305 |
06-04-2026, 06:27 AM Last Post: Cro |
|
| Files for bricked nbt evo | Ryn079 | 0 | 178 |
23-03-2026, 19:13 PM Last Post: Ryn079 |
|
| BRICKED NBT EVO HW2.3-HELP | grizzle | 7 | 927 |
19-03-2026, 11:55 AM Last Post: Cro |
|
| NBT EVO ID4 bricked | Albert-M | 5 | 465 |
18-03-2026, 18:56 PM Last Post: Albert-M |
|
| Help with evo bricked | HU_man | 16 | 1,533 |
13-03-2026, 08:55 AM Last Post: Albert-M |
|
| NBT EVO bricked | szefuncio512 | 29 | 1,604 |
26-02-2026, 10:54 AM Last Post: szefuncio512 |
|
| Solved ✔ MS45 bricked by i5тд/P | tonemoz | 6 | 283 |
23-09-2025, 18:08 PM Last Post: tonemoz |
|
| Solved ✔ Cas4 bricked after i5тд update F25 | m4rrtin | 6 | 292 |
09-07-2025, 06:59 AM Last Post: m4rrtin |
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content
