Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Mercedes key programming problem
28-12-2015, 14:13 PM,
Post: #1
|
|||
|
|||
Mercedes key programming problem
|
|||
28-12-2015, 14:34 PM,
Post: #2
|
|||
|
|||
RE: Mercedes key programming problem
(28-12-2015, 14:13 PM)djspike Wrote: Hi, i bought a key from china and when i want to programme the nec MCU with Nec Prog i get this Error. mcu not good ... try other mcu BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
28-12-2015, 14:56 PM,
Post: #3
|
|||
|
|||
RE: Mercedes key programming problem
Initially I have had the same problem and I thought the keys are bad. I have AK500 and it does not support chinese (BE) keys.
|
|||
28-12-2015, 18:13 PM,
Post: #4
|
|||
|
|||
RE: Mercedes key programming problem
(28-12-2015, 14:34 PM)volavka Wrote:(28-12-2015, 14:13 PM)djspike Wrote: Hi, i bought a key from china and when i want to programme the nec MCU with Nec Prog i get this Error. i tried other MCU and have the same problem MCU with F9234 mask have problem with it( clone key from china) MCU with 567897061 mask can read and write without problem(original key) |
|||
30-01-2016, 22:56 PM,
Post: #5
|
|||
|
|||
RE: Mercedes key programming problem
You try via socket or IR?
|
|||
15-02-2016, 17:54 PM,
Post: #6
|
|||
|
|||
RE: Mercedes key programming problem
Hi
you most replace the nec mcu and renew with socket before. i do this and done goodly programming. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content