[Yhoni]

Hello mates,

Could anyone please help me disable DTC P0340 on a SAGEM S3000 ECU from a Renault Megane 1.6 16V?

Read details:

• Tool: Kess3 (Boot mode)
  
  
• Vehicle: Renault Megane
  
  
• Engine: K4M T7 (1598cc / 83kW)
  
  
• Date: 17/05/2004
  
  
• References: 8200387138 | 21584288-2A | 4104646965 | 8200321263
  
  

I have attached the vehicle document, ECU photos, and the original EEPROM and MPC files.

Any help with this file would be greatly appreciated.

Thanks in advance!

Kind regards,

 

SAGEM S3000_dtc_p0340.zip
File Type:
Downloaded:	14 times
Size:	1.53 MB

[ayllon308]

test file
https://drive.google.com/file/d/1mt0davj...sp=sharing

[Yhoni]

test file
https://drive.google.com/file/d/1mt0davj...sp=sharing

Hello ayllon308,

I'll test and report.

Thanks!

Kr,

[Yhoni]

test file
https://drive.google.com/file/d/1mt0davj...sp=sharing

Hello ayllon308,

Thank you for providing the modified file, but unfortunately the DTC is still present and there has been no change in behavior.

Would anyone be able to assist or point me in the right direction? A map pack or a DAMOS  for this ECU for WїиоL54 would be extremely helpful, as I haven't been able to locate one anywhere.

[*]Vehicle: Renault Megane Coupé Cabrio
[*]Engine: K4M T7 (1598cc / 83kW)
[*]Date: 17/05/2004
[*]References: 8200387138 | 21584288-2A | 4104646965 | 8200321263

Any help would be greatly appreciated

Kind regards,

[bioggy]

disabled it i used a tool im working on if it doesn't work please let me know I will use one of my others that does. Password is in PM

[Yhoni]

disabled it i used a tool im working on if it doesn't work please let me know I will use one of my others that does. Password is in PM

Hello  bioggy,

I'll test and report.

Thanks!

Kr,

---

disabled it i used a tool im working on if it doesn't work please let me know I will use one of my others that does. Password is in PM

Hello mate,

Thank you for your help and for sharing the file.

I have just tested it on the vehicle, but DTC P0340 is still present and reading exactly as before, as if no changes were applied.

Would it be possible to try a different approach or a new modification if you don't mind having another look? I am open to testing any new file.

Thanks again for your time and support!

[bioggy]

sure give me about 30 mins, I will grab my other laptop

---

same password please let me know

[Yhoni]

disabled it i used a tool im working on if it doesn't work please let me know I will use one of my others that does. Password is in PM

Hello mate,

I have tested the latest file, but DTC P0340 is still present. Could we try another solution if you have any other ideas?

Thanks for your help!

Kr,

[bioggy]

I found 4 instances in it and deleted them I can try for another see what else I can find

[wajda3]

hi 
here file with dtc off 

pass pm