Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech

  2. ATM - Balkan

    atm balkan file service
  3. Kess Ktag


  5. Enigma Tool


  7. NBE Files

  8. Smartauto CarPlay

Post Reply 
Motorcycle Dyno Software
02-01-2016, 10:40 AM
Post: #1
Motorcycle Dyno Software
Here is the final version of the Dynomec B1 software which you will need to make your own fully functional motorcycle inertia Dyno. Its settings are fully adjustable see instruction manual.
Pc will need a hardware serial port and a usb mouse for correct functioning once the pass through box is connected to roller sensor, wideband lambda, and rpm sensor for ignition system.

You will need to make a frame with a heavy roller, you will also need to make or buy a pass through box with wideband lambda (Data aquisition unit), this can also be purchased online for a few hundred pounds, for more information, search google or youtube for all the Dynomec inertia Dynamometer Systems stuff, build your own inertia dyno etc. Once you have built and calibrated the dyno they are highly accurate in reading rpm, bhp and torque, print custom graphs, air fuel ratio etc. works well.

Just run the software from its folder, create shortcuts to desktop. Change settings by editing a file, like roller diameter and mass, business name and phone number etc.

I think that maybe this is the only place where you can get this full soft for free.

Pm for pass




Attached File(s) Thumbnail(s)
File Type: .txt
Downloaded: 63 times
Size: 70 bytes

Tight lines and bending rods are what makes my day biggrin
Reputation: +10 - volavka [+1] , maxeugen1 [+1] , foxtwo [+1] , camaro [+1] , Heinzung [+1] , snowmad [+1] , darksidious [+1] , majax2a [+1] , bmwr1200c [+1] , Vojno [+1]
Find all posts by this user
Quote this message in a reply
 Thanks given by: volavka , andrew64 , maxeugen1 , foxtwo , Kenny , pmroyal , camaro , grunf59 , Heinzung , bouziimeca , darksidious , majax2a , bmwr1200c , sixcode , Vojno
06-01-2016, 20:34 PM
Post: #2
RE: Motorcycle Dyno Software
Tested only on windows xp 32bit

Sent from my SM-N910F using Tapatalk

Tight lines and bending rods are what makes my day biggrin
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:

User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content