Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. New Emulator

  2. Immo Bypass

  3. Julie Emulator

  4. AUTO-CHIPS

  5. Ecu-Service



PSA interface differences
08-01-2016, 10:43 AM,
Post: #11
RE: PSA interface differences
For reference, if some one want to play with your VCI. Edit your Reference Serial as...

963830 will show PEUGEOT
963831 - CITROEN LEXIA
963832 - CITROEN PROXIA
others - Inconnue (unknown)

But this would not afftect the operation as known, credit to Mr. morfej (since 2011 smile)
Regards,
Quote this message in a reply
[+] 4 users say Thank You to zmann for this post
08-01-2016, 11:07 AM,
Post: #12
RE: PSA interface differences
Was too quick ... yes XS MCU boards are rev A or rev B like titoun already mentioned.


Attached Files Thumbnail(s)
   
Reputation: +1 - fantomel [+1]
Quote this message in a reply
[+] 4 users say Thank You to morfej for this post
09-01-2016, 01:34 AM,
Post: #13
RE: PSA interface differences
(08-01-2016, 09:03 AM)morfej Wrote:  Also if you take a good look of the genuine PCB rev B and rev C ... there are differences.

Never seen any pcb of revison D ... but might be that new ones that has possibility to connect the bluetooth module addon.

Revision A most of them are by my old ones ... which have a square box casing.

My oppinion is that reference serial is not so important at all ... at least I think diagbox software doesn't car about it. It is checking the VCI serial number.

Thanks for the comment. I always find those etched printings indicate the hw revison as A or B too. But my notice on the first post says the 'ink mark' usually blue and red on the genuine PCBs which usually on the square box of B and C, also found them on your next post photo too.
Quote this message in a reply
09-01-2016, 08:55 AM,
Post: #14
RE: PSA interface differences
Thank you all for the replys. With software i did mean the diagbox version. Im trying to understand but it is hard because of the language and my average electo knowledge. If i understand wel, if i buy a clone one with diagbox 7.65 on it, it will be a rev. C? For example this one; I have not seen one with such a flat connector before (normally round or direct obd connector) but it tells full chip.

http://m.aliexpress.com/item-desc/32394048528.html
Quote this message in a reply
26-01-2016, 21:42 PM,
Post: #15
RE: PSA interface differences
This is some kind of lexia and autocom/delphi hybrid.
obd connector with led light is taken from autocom/delphi


(09-01-2016, 08:55 AM)don1 Wrote:  Thank you all for the replys. With software i did mean the diagbox version. Im trying to understand but it is hard because of the language and my average electo knowledge. If i understand wel, if i buy a clone one with diagbox 7.65 on it, it will be a rev. C? For example this one; I have not seen one with such a flat connector before (normally round or direct obd connector) but it tells full chip.

http://m.aliexpress.com/item-desc/32394048528.html

Where is this connector used?


Attached Files Thumbnail(s)
   
Quote this message in a reply
27-01-2016, 11:30 AM,
Post: #16
RE: PSA interface differences
(26-01-2016, 21:42 PM)pagautas Wrote:  This is some kind of lexia and autocom/delphi hybrid.
obd connector with led light is taken from autocom/delphi


(09-01-2016, 08:55 AM)don1 Wrote:  Thank you all for the replys. With software i did mean the diagbox version. Im trying to understand but it is hard because of the language and my average electo knowledge. If i understand wel, if i buy a clone one with diagbox 7.65 on it, it will be a rev. C? For example this one; I have not seen one with such a flat connector before (normally round or direct obd connector) but it tells full chip.

http://m.aliexpress.com/item-desc/32394048528.html

Where is this connector used?

Hi,

Here for reference : http://cartechnology.co.uk/showthread.php?tid=9496 !

12Vdc power supply connector (out for ACTIA BT ADDON use) !

Regards
Quote this message in a reply
13-05-2017, 09:39 AM,
Post: #17
RE: PSA interface differences
The original is in 2014,ref "С".

   

   

   

   

   
Quote this message in a reply
[+] 1 user says Thank You to leon163 for this post
17-09-2018, 19:30 PM,
Post: #18
RE: PSA interface differences
Sorry to open up this old post, anyone no what is the difference between the 9780.z5 and the A.1281 Z ?
Quote this message in a reply
19-09-2018, 05:01 AM,
Post: #19
RE: PSA interface differences
(17-09-2018, 19:30 PM)rightpcb Wrote:  Sorry to open up this old post, anyone no what is the difference between the 9780.z5 and the A.1281 Z ?

If this is the original, there are no differences. I had an old "A" interface that worked fine with Diagbox 8+++++. If it's a clone, it all depends on the "curvature of Chinese hands".
Quote this message in a reply
[+] 1 user says Thank You to leon163 for this post
05-08-2019, 19:20 PM,
Post: #20
RE: PSA interface differences
Hello friends I have an inteface diagbox 9780.z5 and her serial was B, but by accident I updated with the program interface check and now and C more now I can not read anything, I use diagbox 5.20 for old cars since my interface A.1281 .z with updated diagbox not read old cars, could someone help me solve this problem?
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
PCitroen PSA interface FIRMWARE 4.3.7 from official diagbox 9.37 911sniper 4 3,153 01-09-2019, 17:47 PM
Last Post: mattydr67
PPeugeot Reflash lexia interface from B to C lionofthedesert 59 33,493 18-08-2019, 15:24 PM
Last Post: no_name
1Actia psa interface reflash or no ? pardul 7 339 05-08-2019, 09:04 AM
Last Post: zmann
PCitroen Lexia interface recognization problem Jedrek 2 991 30-06-2019, 20:35 PM
Last Post: Joda
PPeugeot Precautions for original Peugeot Planet Interface allpro 6 926 01-03-2019, 14:00 PM
Last Post: leon163
  Interface not recognized... :-( cro1983 17 1,821 19-02-2019, 22:02 PM
Last Post: Batru
PCitroen Reflash lexia interface from C to B guerragt5 7 1,213 03-02-2019, 15:30 PM
Last Post: mattydr67
  [NEED] PSA Interface Checker v4.0 roanoke 2 5,215 17-01-2019, 15:11 PM
Last Post: rezayeto
  Solved ✔ The interface is recognized in usb but the green light turn off and does not work. Rafiusk 17 2,249 11-01-2019, 17:42 PM
Last Post: mattydr67
  Edit your XS EVOLUTION interface to make it equivalent to an original! titoun 10 9,073 08-01-2019, 09:04 AM
Last Post: Multipla2009

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content