Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help me to read MC68HCO5 uch megane1
22-01-2016, 08:29 AM,
Post: #1
|
|||
|
|||
Help me to read MC68HCO5 uch megane1
PLZ
help me how to read motorola mc68HCO5B16 from UCH siemens megane 1 i have x prog so do i dessoldring and read it via PLCC or there're a deffrent way ? |
|||
22-01-2016, 08:43 AM,
Post: #2
|
|||
|
|||
RE: Help me to read MC68HCO5 uch megane1
(22-01-2016, 08:29 AM)benkacem Wrote: PLZHello u can read it via plcc or with wires using the pin out of this mcu Sent from my ASUS_T00J using Tapatalk Dpf,AdBlue,Egr,Dtc,Tuning. Full solution for KESS, K-TAG and TRASDATA, K-tag upg fr fw: 5.001 to fw: 6.070 Including Trasdata / Kess v2 upg fr fw: 3.099 to fw: 4.036 Service files 100% guaranteed available
|
|||
22-01-2016, 10:01 AM,
Post: #3
|
|||
|
|||
RE: Help me to read MC68HCO5 uch megane1
Whats cpu mask ?
BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
22-01-2016, 17:38 PM,
(This post was last modified: 22-01-2016, 17:43 PM by benkacem.)
Post: #4
|
|||
|
|||
RE: Help me to read MC68HCO5 uch megane1
Hi thanks for respons
Mask is SC856260FN A2C00010395C 1K20C QQMM0212 i use x progm and i tried via plcc but it says '' bypass security'' and zero percent to read |
|||
22-01-2016, 21:28 PM,
Post: #5
|
|||
|
|||
RE: Help me to read MC68HCO5 uch megane1
Hi for this use direct incircuit reading for connections look xprog manuel . Xprog reading this mask whithout problem .
Envoyé de mon GT-I9505 en utilisant Tapatalk |
|||
24-01-2016, 00:33 AM,
Post: #6
|
|||
|
|||
RE: Help me to read MC68HCO5 uch megane1
1K20C read-write with desolder on plcc adapter xprog m like 68HC705B32(3G96A)..100% work I tested.
|
|||
Reputation: +1 - benkacem [+1] | |||
24-01-2016, 06:33 AM,
Post: #7
|
|||
|
|||
RE: Help me to read MC68HCO5 uch megane1
YOU CAN TRY UPA PROGRAMMER THE BEST FOR MOTOROLA MCUS BUT PCLL SEE PDF
|