[koziol]

2007 BMW 328i cant reset brake warning light front and rear
change sensors 2 times everything looks fine
tried with launch and ISTA/D same thing no success
never had such a thing before always went fine
today problem
any idea how to solve that ?

[CATAHA]

2007 BMW 328i cant reset brake warning light front and rear
change sensors 2 times everything looks fine
tried with launch and ISTA/D same thing no success
never had such a thing before always went fine
today problem
any idea how to solve that ?

Try unplugging both sensors and shorting them out
then reset
Try unplugging battery
try resetting speedo
try resetting with speedo
if there is life left on brakes (in speedo) it won't allow you to erase
Check fuses
report back

[koziol]

On speedo shows only dash marks ------
what do you mean by resetting speedo

[CATAHA]

On speedo shows only dash marks ------
what do you mean by resetting speedo

If it shows -------, it could be that you are not holding long
Also is your time and date set, cause that could also pose a problem

[inspi1981]

And handbrake must be released

[Sabreace]

Maybe you try all and nothing change; there is a last hard Method

Use Tool32
load your DSC.prg
Choose : cbs_zustand_neufahrzeug ( read the Job Info window if you know what this command do )
click do job once and Pray

DO IT AT YOUR OWN RISK

[CATAHA]

And handbrake must be released

also the hood and doors must be closed

[Mrg0721]

2007 BMW 328i cant reset brake warning light front and rear
change sensors 2 times everything looks fine
tried with launch and ISTA/D same thing no success
never had such a thing before always went fine
today problem
any idea how to solve that ?

It could be something as simple as a cbs correction. Ever tried that?

[koziol]

I did not try cbs correction
what does it mean cbs correction?

[Mrg0721]

I did not try cbs correction
what does it mean cbs correction?

are you running ISTA+ (Rheingold) 3.53.30?