[gvitkis]

Hello dear friends. I have a small problem I want to correct mileage of BMW Series E but not only in the dashboard but in all the ECU of the vehicle where are the mileage Many thanks to all the mythical members I hope you manage to help me. Thanks so much

[dj-um]

Depeand what E series?
E39 and E60 are different E series)
Feel free to ask questions)

[gvitkis]

Sorry . I did not specify SERIES E60-90. Thanks so much

[mialczek]

E60
Dash + CAS + All Keys[use] + ECU[diesel] + clear all errors + reset service
Attention!
1. ABS - Check the latest flat tire
2. Check the battery exchange

---

e90 similarly

CAS 3 and CAS 3+ -we do the OBD[/align]

[gvitkis]

Therefore you have to open weld Dash + CAS . What tools do I need to do this? Not exists procedure for doing this OBD2?

[XmoDDeR]

Depending on type of 35080 u may need an eraser regular just eprom programer, the cas i dont feel safe doing obd i use original r260, but red 912 clone works well too, then drive car 10km with each key , clear dtc and errors etc anything else you need , we are here to assist

[mialczek]

I use an enigma.
All it takes less than an hour.
Dash disassembles_[not desolder 35080 - super eraser programing in circuit 10s]
Cas 3 and Cas3+ -OBD2
CAS2 - dissambles [not all]

[bawareca]

Also on early E60 the miles are stored in the MPM.

[gvitkis]

For Cas 3 OBD which tool you want?

[antenor]

For Cas 3 OBD which tool you want?

DIGIPROG 3 (CAS3) and R270 (EEPROM)