Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
I changed nxp but Ktag give Error
12-02-2016, 14:01 PM,
Post: #1
|
|||
|
|||
I changed nxp but Ktag give Error
Hello, i buy new nxp and changed.
i checked nxp pins with multimeter. all ok. soldering ok. i tried programming with Jlink, but not work. i connected FlashMagic but again error Thanks for help. |
|||
12-02-2016, 14:14 PM,
Post: #2
|
|||
|
|||
RE: I changed nxp but Ktag give Error
Did you get pin 1 on nxp in correct position
Post HQ pics of nxp close showing all pins |
|||
12-02-2016, 14:43 PM,
(This post was last modified: 12-02-2016, 14:49 PM by aki1.)
Post: #3
|
|||
|
|||
RE: I changed nxp but Ktag give Error
here HQ images but all pins I checked one by one. Does the Chinese seller tricked me my Jlink may be problematic i tried flashmagic but not reading security. |
|||
17-02-2016, 02:08 AM,
Post: #4
|
|||
|
|||
RE: I changed nxp but Ktag give Error
Not soldered well. Cold soldering, can see solder pasta in pins.
Was I helpful? Please support my time and Hit And -button's. NEW Trasdata 9 Master support Bosch SM(service mode) etc |
|||
17-02-2016, 19:32 PM,
Post: #5
|
|||
|
|||
RE: I changed nxp but Ktag give Error
The board is damaged, paths removed.... this boards are very sensitive, I think that board is not good anymore..
|
|||
17-02-2016, 20:23 PM,
Post: #6
|
|||
|
|||
RE: I changed nxp but Ktag give Error
I have one eu clone and this chinese clone.
Before, i re- solder nxp after, eu clone and this chinese clone of the pins I checked with the multimeter. There are small fluctuations in values. but do not break pins.The image appears broken pins empty. I ordered a new nxp and Ulink. As for orders I am to try again. Thanks |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
ERROR ems3155 NISSAN JUKE | mouss35500 | 0 | 48 |
25-04-2024, 09:31 AM Last Post: mouss35500 |
|
Edc17c10 security access error | al70 | 3 | 136 |
19-04-2024, 13:04 PM Last Post: bboctavian |
|
Mazda CX-7 need ecu eep Adblue error removed | joshturk | 4 | 214 |
01-04-2024, 07:02 AM Last Post: joshturk |
|
[Request] Ksuite 2.23 for reworked Kess and KTAG | Jordiano | 0 | 138 |
30-03-2024, 10:17 AM Last Post: Jordiano |
|
A3 1.8tfsi Flaps Error Delete | jenny123 | 3 | 211 |
19-03-2024, 13:44 PM Last Post: Jurebv |
|
Help error Ford Mondeo V 20tdci Delphi DCM61 | bmw320d | 2 | 122 |
18-03-2024, 18:42 PM Last Post: bmw320d |
|
need full bdm ktag bmw e87 118d | saninpwnzor | 2 | 128 |
14-03-2024, 18:05 PM Last Post: saninpwnzor |
|
Ktag 7020 firmware+SD free - update solved | ovi730 | 38 | 16,604 |
07-03-2024, 13:38 PM Last Post: vLTy |
|
PSA EDC17C60 possibile with KTAG? | Dawid_97 | 8 | 367 |
19-02-2024, 13:39 PM Last Post: eurofix |
|
pajero checksum error | mecanicobmw | 1 | 190 |
28-11-2023, 11:33 AM Last Post: Key1 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content