Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
F13 serie Cas4
09-02-2016, 02:51 AM,
Post: #1
|
|||
|
|||
F13 serie Cas4
Hello mates... customer want to corect km on f13 serie cas4 but I doubt I can make it via x-prog 5.5.1 or r270 1.20..any idea how to reed/write this secured mcu safely thanks in advance
|
|||
09-02-2016, 09:10 AM,
Post: #2
|
|||
|
|||
RE: F13 serie Cas4
Very risky with xprog as you need to lift pins and can erase dflash contents whilst trying to read ...r270 wont do it as maskset will be 58mth/1N35H ..you will need etl programmer whitch i use and is 100% but only drawback is removal of mcu from pcb
|
|||
09-02-2016, 21:14 PM,
Post: #3
|
|||
|
|||
RE: F13 serie Cas4
Xprog should be alright. But you need can filter as well.
|
|||
09-02-2016, 21:43 PM,
Post: #4
|
|||
|
|||
RE: F13 serie Cas4
How do you mean can filter I want to corect cas and 35160..
|
|||
09-02-2016, 22:19 PM,
Post: #5
|
|||
|
|||
RE: F13 serie Cas4
(09-02-2016, 21:43 PM)alex.eobd2 Wrote: How do you mean can filter I want to corect cas and 35160.. Doing cas you fine... But you can do this way with can filter. |