Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
HOW TO VIRGINIZED AT 100% ECU OR MODULE
10-02-2016, 05:49 AM,
Post: #1
|
|||
|
|||
HOW TO VIRGINIZED AT 100% ECU OR MODULE
Hello every body
I shall want to make totally blank (virgin) an ECU or a module (KOMBI, DME, BMSK, etc.) as if it went out of the factory or the assembly line. With which software it is possible (TOOL32, WINKFP or others) If possible, which is the procedure. I work with the software of the forum and an ICOM A1 OEM which work perfectly. Thank you for your answers. Good day. |
|||
10-02-2016, 07:49 AM,
Post: #2
|
|||
|
|||
RE: HOW TO VIRGINIZED AT 100% ECU OR MODULE
This goes with any of the above programs.
This calls for other hardware and software. And it has to be treated the EEprom. |
|||
10-02-2016, 09:14 AM,
Post: #3
|
|||
|
|||
RE: HOW TO VIRGINIZED AT 100% ECU OR MODULE
Are you sure?
No solution? |
|||
10-02-2016, 09:22 AM,
Post: #4
|
|||
|
|||
RE: HOW TO VIRGINIZED AT 100% ECU OR MODULE
ECU's came with software from factory
And DME, CAS... are allready VIN coded |
|||
10-02-2016, 12:36 PM,
Post: #5
|
|||
|
|||
RE: HOW TO VIRGINIZED AT 100% ECU OR MODULE
Such question leads to a lack of experience which is not a bad thing , we all were in same boat even till today.
Some procedures works on some of normal non security related ECUs as some highlighted earlier, but the newer the harder it gets these days , I advise you to specify your question with one single ECU and then search , read and ask specific question related to that specific ecu , this is how i learned about what you called Virgin the ECU . Good luck [WHITE SMILING FACE] |
|||
10-02-2016, 16:43 PM,
Post: #6
|
|||
|
|||
RE: HOW TO VIRGINIZED AT 100% ECU OR MODULE
From my experience
When you Change VIN-Number to 000000000000000 ISTA-P See's it as New Module It could be tested Easy and visibly on IKE When you change last 7 to 000000 IKE Will display CODE Ista-p will say I See you installed new module Do you want to program it? I would like to edit The mile Will not be changed to Zero If any of my posts or current one helps then don't forget to press thanks and add a reputation
|
|||
11-02-2016, 13:21 PM,
Post: #7
|
|||
|
|||
RE: HOW TO VIRGINIZED AT 100% ECU OR MODULE
Hi,
I just want RAZ with 000000 kms in the KOMBI and BMSK(DME) on the new BMW motorcycle. The motorcycle is new, but she's damaged buy the water (natural catastrophe)... The KOMBI and BMSK are out of order. I want mounted the old modules for repair it. Thanks |
|||
14-02-2016, 00:56 AM,
Post: #8
|
|||
|
|||
RE: HOW TO VIRGINIZED AT 100% ECU OR MODULE
(11-02-2016, 13:21 PM)ipcsr76 Wrote: Hi, Did you try it with winkfp?? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content